SPONSORS
2024 ICRBE EXPO |
RV Plus T-LCSG
Posted by:
Mark B. Gonsalves
(---)
Date: June 09, 2020 05:30PM
I have 2 sets of titanium T-LCSG but only 1 size 20. I would like to make use of the guides I already have on hand Could I successfully use TRVSG in 25 and 20 for the strippers and/or 2nd guide in the train? They are going on 13' CTS S8 blanks I have been sitting on. Mahalo in advance for any advice. Re: RV Plus T-LCSG
Posted by:
Jim Ising
(---.dthn.centurylink.net)
Date: June 10, 2020 08:53AM
Mark, the only thing critical is the heights of the guides you choose. They could all be different models and you could still build a good layout if the spacing and heights came out with good concentricity and proper choke at each position. Personally, I think the LC and LRV would look pretty odd paired together in the same train. One has a very long footprint while the other is very short. I assume you are thinking they are both "reverse" guides so they would look OK together but since all LRV's are eventually followed by a KW, I think it would be "less noticeable" to go to a KW after the LC. Not sure this answers your question but... Re: RV Plus T-LCSG
Posted by:
Mark B. Gonsalves
(---)
Date: June 10, 2020 11:46PM
Mahalo Jim. I ordered another sized 20 T-LCSG to complete the train. I will use the LRV on my next builds Re: RV Plus T-LCSG
Posted by:
Jim Ising
(---.dthn.centurylink.net)
Date: June 11, 2020 08:53AM
I think that's your best bet, Mark. Good luck with the build. Sorry, only registered users may post in this forum.
|