SPONSORS
2024 ICRBE EXPO |
Spraymax
Posted by:
Mike Ballard
(---.ip-167-114-11.net)
Date: April 03, 2020 09:32AM
I have been using the one-can, two-part spraymax epoxy paint for refinishing some older rods. Only used the clear version but the company will custom color a can for a slight uncharge. Just wondered if anyone has done this and what your results were.Thx. Re: Spraymax
Posted by:
Tom Kirkman
(Moderator)
Date: April 04, 2020 08:55AM
The product was originally intended for high-end spot color repairs on automobiles so I'd assume it would be more than fine on a fishing rod.
.................... Re: Spraymax
Posted by:
Peter Uveges
(---)
Date: April 11, 2020 10:57PM
I used it and it turned out to be the best paint job I've done on my blanks. With the original Factory coat on the blanks the rods would always come apart. After using the spray max , I found that it stuck together the entire day. it wasn't necessary to continuously reattach the rod. The coating is extremely hard but flexible, very tough. Out of all the different spray paints that I've used, spray max is by far the best. Sorry, only registered users may post in this forum.
|