SPONSORS
2024 ICRBE EXPO |
lamiglas walleye blanks
Posted by:
Matt Ruggie
(---)
Date: February 22, 2020 08:59AM
good morning,
anyone have any feedback/reviews on the lami walleye blanks. specifically the forrest green LW 801 M , 6'8" , 3/16-5/8 6-12 lb.. and possibly the LW 841 MT (not sure what the T designation is for.) description says walleye jigging rods, fast action sensitive tip. The line and lure weights are right inline with what I usually look for in small jighead/plastics rod for smallmouth on several rivers using 1/8,3/16, 1/4 oz. plus plastics. havent been able to find any reviews on these blanks, BTW ALSO , looking for a replacement for my XMG50 LC 862 that snapped in half on me (I certain it was damaged transporting, but snapped in half on a 14" smallie) that rod was an excellent 3-4" tube jig rod with 1/8-1/4oz. insert tube heads TIA Matt Re: lamiglas walleye blanks
Posted by:
Matt Ruggie
(---)
Date: February 22, 2020 09:24AM
I'm thinking T designation is for trolling?
found some info on the discontinued factory built rods that shows them as mod fast not fast. lami site says fast. Also one source says im7 graphite, hows that compare to say the old xmg 50 graphite. loved the old xmg 50s but only have a couple left thx Matt Re: lamiglas walleye blanks
Posted by:
Spencer Phipps
(---)
Date: February 22, 2020 10:17AM
Historically, MT has meant "magnum taper" in the Lamiglas lines, the problem with many reports on action is are they talking about how fhe tip flexes, or how fast it returns to straight after the cast, which to me is reaction. Reports on graphite as IM 7, probably left off some numbers, probably IM 700, the same graphite as G Loomis IMX, I've used both for decades and I see little difference, nothing I'd want my life to depend on. It's 47 mil graphite, the XMG were multi modulus blanks highest being 58 mil. Re: lamiglas walleye blanks
Posted by:
Matt Ruggie
(---)
Date: February 22, 2020 11:43AM
Spencer thanks for the informative reply.
it's been a struggle to find info on these blanks, I may have even posted on these awhile back with very little feedback. seems no one is using them lol. alittle more digging and I found the LW68M factory rod is described as being a good drop shot/light crank blank with a light sensitive tip, which to me sounds like it may have a soft whippy tip section(not what I'm looking for) if MT is mag taper it might be more inline with what I'm looking for. then again may just stick with st croixs and others I'm used to. I'll try giving lamiglas a call this week tho thx Matt Re: lamiglas walleye blanks
Posted by:
Spencer Phipps
(---)
Date: February 22, 2020 01:00PM
We got lots of walleye, some over 20 lbs. just a mile, or so from the Lamiglas plant. They started getting interested in building appropriate blanks back in the late 80,s when a western walleye angler started going to walleye country and winning some money with custom rods he built on the IM 700 blanks, his name was Ron Boggs. Built some rods on the blanks he used in 6 and 6 1/2 ft. lengths, than I got stationed in Michigan.
They were ok rods, great in the rivers where larger offerings are the norm, just the conditions found in the western states. 1/2 to 1 oz. jigs are the norm here, as are deep, stepped reservoirs. Caught a 25 lb. Chinook salmon once while trolling a worm rig on a backbouncer, the rod was not impressed, had more.than enough backbone after the light tip. The blanks were rated 6 to 17 lb.to give you an idea of how they rate things. They were IM 700 blanks rated ML, made great smallmouth rods also. Edited 1 time(s). Last edit at 02/22/2020 01:08PM by Spencer Phipps. Re: lamiglas walleye blanks
Posted by:
roger wilson
(---)
Date: February 22, 2020 01:49PM
When I first started building rods many years ago, I initially only used the Lamiglas blank. I still have a few that I still consider to be one of the best walleye rods in my arsenal.
These were all 6 1/2 feet medium light rods with a very very soft tip that was ideal for negative biting walleyes. Re: lamiglas walleye blanks
Posted by:
Matt Ruggie
(---)
Date: February 22, 2020 07:27PM
great info guys thank you.
really never handle any walleye specific blanks but on paper they seem to line up with what we use for smallies ....the soft tips may steer me in another direction tho. I have 2 immortal spinning blanks to build up (a M and ML, both 6'8") hoping these will fit in for what I'm looking for but was exploring back up ideas just in case. thx Matt Re: lamiglas walleye blanks
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: February 22, 2020 08:15PM
Matt,
I can honestly say I've never had a dropshot rod/blank in my hand that I would classify as whippy, they have all been well structured and responsive fishing tools. I believe the owner/builder at Riley Rods has won a lot of saltwater tournaments using Rainshadow dropshot and senko blanks among others Rainshadow blanks in his custom rod builds. His posts and pictures can be found under Mike Pedersen. Re: lamiglas walleye blanks
Posted by:
Spencer Phipps
(---)
Date: February 23, 2020 01:00PM
I may have a few LC 862 left. Can't look now, recuperating from my 5th surgery since I had an aortic disection in late June. Re: lamiglas walleye blanks
Posted by:
Matt Ruggie
(---)
Date: February 24, 2020 09:04PM
Spencer,
first off, wish you well with your recovery. hang in there. if ya do have an extra LC862 I'd be interested for sure. Maybe whippy wasnt the best description. i.just know some of the dropshot blanks I ve handle have too soft of a tip for what I like for working certain baits. But the are designed that way for a reason, right tool for the job/bait kinda thing. thx Matt Sorry, only registered users may post in this forum.
|