I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2025 ICRBE
Custom Rod Symbol
Common Cents System
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Century Rods
Custom Fly Grips LLC
Decal Connection
EPSON Decal Printers
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Pages: 12Next
Current Page: 1 of 2
Recommendation for a good fly rod blank
Posted by: Joe Newton (131.204.254.---)
Date: February 03, 2020 05:04PM

Rodbuilders,

I am somewhat new to rod building. I took the mudhole course back in the summer and have now built 5 spinning rods of various lengths and weights. Still have a way to go but have made progress with each build. It is an addicting hobby. I want to build a good fly rod in the near future and am asking for advise for good fly rod blanks. I want to build a 9 foot 5 wt for pond fishing (panfish and bass) and trout fishing in Tennessee and North Carolina. I realize everyone has their favorites. I have used MHX and CRB blanks from Mudhole, a Rainshadow blank from Getbitoutdoors, and two RodGeeks blanks (all spinning blanks). Any recommendations for a good fly rod blank you can give me will be appreciated. Not necessarily looking for the cheapest blank but the best blank for the money in your opinion. Thanks.

Joe

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: George Sparrow (---.sub-174-218-18.myvzw.com)
Date: February 03, 2020 06:00PM

I'd love to hear "best blank for the money" suggestions too. (had to reply to be able to follow the thread)

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Mike Bradford (---.bois.qwest.net)
Date: February 03, 2020 06:10PM

For me the best blanks for the money are some of the Batson blanks, and some of the Pac-Bay blanks.

Mike Bradfrod
R.M.B. Fishing Rods
Nampa, Idaho

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Phil Ewanicki (---.res.spectrum.com)
Date: February 03, 2020 06:29PM

Which fly rod blank is "best" for you depends on what you are looking for in a fly rod: durability, lifting power, casting? To find a better casting blank than a Temple Forks Outfitter Axiom II blank or Temple Forks Outfitter BVK blank you will have to part with more than $600.00.

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Lance Schreckenbach (---.lightspeed.hstntx.sbcglobal.net)
Date: February 03, 2020 06:53PM

The MHX fly rod blanks are very similar to the Batson / Rainshadow, the GB and the RG. You could say they are nearly identical accept for color, those are all good. For something a little different look at Temple Fork Outfitters (TFO) and North Fork Composites (NFC). I have built fly rods on all of these and I don't think you can go wrong with any of them for a 5 wt. The NFC blanks are very top end and make an excellent 5 wt and the F590-4 (GammaBeta) list for $445 but you can get it for $174 now and made in the USA.

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Donald La Mar (---)
Date: February 03, 2020 07:10PM

Every TFO rod I've ever built (BVK, Finesse, Professional, Mangrove) has performed well.

If you want to go more up scale take a look at the Epic 5 weight 9' carbon fiber kit which is a soup to nuts affair.

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: February 03, 2020 07:22PM

As a builder of only fly rods, my opinion is that the CTS Affinity X is the very best that can be bought! All the those listed by others above are good blanks, and for the price it is hard to beat the MHX.

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Bill Hickey (---.nycap.res.rr.com)
Date: February 03, 2020 08:54PM

I'll second the CTS Affinity X if your looking for a Carbon Blank, between that and the Affinity M, best casting fly rod blanks going in my opinion.

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Drew Pollock (---.201-34-174.ftth.swbr.surewest.net)
Date: February 03, 2020 09:11PM

For a moderate priced blank, you will do no better than the RodGeeks fly rods. And a custom color for $15 more is hard to beat. They are almost an exact equivalent of the St Croix SC4/2 blanks that sadly are no longer available, except as a complete rod or a Rod Geek blank. I've built a bunch of them at this point and can't say enough good things. High quality and fair price. The only downside, and it's minor, is that it takes 2 weeks to arrive at your door after ordering. But these are very good blanks at a very good price. And made in St Croix's Mexico factory instead of a nameless Chinese factory like most of the same price competitors. Though I agree, that the TFO rods cast well, and most of them are made in Korea.

And for full disclosure, I fish a MHx 5wt and think it's a nice blank. So if you already like Mudhole (and I do too as a supplier) you could go back to an MHx and not be disappointed. But Rod Geeks are nice blanks, and since you've already used them and are familiar with the ordering process, that looks like the winner to me.

Drew

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Herb Ladenheim (---.lightspeed.rcsntx.sbcglobal.net)
Date: February 04, 2020 12:09AM

Thank you Phil.
Thank you Bill.
Joe,
Of course, as the CTS Rep, I am prejudiced in favor the CTS blanks.
If you like a fast blank you can't beat the CTS Affinity-X #5 - at any price. If you feel more comfortable with a less fast blank you might like the Affinity-M that has a stiffer tip and a slightly more moderate butt section than the Affinity-X making it bit less fast - but more powerful because the stiffer tip facilitates loading the mid and lower sections where the power is located.
Bot - on the other hand - if you "push" the Affinity-X you can also access its power.
The CTS product is arguably the best performing blank for for any money.
And in the final analysis - they are not really all that expensive.
Contact me if you wish pricing and delivery time.

BTW - I will be spending some time in the Asheville, NC area this August and am building both the "X" and the "M" in a #5.
Regards,
Herb
CTS Rep.

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Quinn Canfield (---.bstnma.fios.verizon.net)
Date: February 04, 2020 06:34PM

Not sure how much you've fly fished in the past but if you are relatively new to it save some money and look for something around $100 or less (give or take a little). Pacbay, Rodgeeks,TFO Pro II, some of the Batson blanks all fall into that price range. I don't have any experience with MHX fly rods just the spining/casting blanks.
Don't be afraid to check out cheap blanks from the @#$%& site either. The ones I've built on work fine and they give you an inexpensive platform to practice on.
Once you have some build time under your belt (and assuming you are still working on your casting) then step up to CTS or some of the other higher end blanks. They are better.....

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Randy Kruger (---.res.spectrum.com)
Date: February 04, 2020 10:36PM

Go for broke, build a CTS Quatz. Nothing says fly fishing like the smooth power of quality fiberglass. Soft tips save light tippets, and land dry flies like nothing else.

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Joe Newton (---.dhcp.mtgm.al.charter.com)
Date: February 05, 2020 12:08AM

Thanks to all who have responded. Lots of great options here.

Joe

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Herb Ladenheim (---.lightspeed.rcsntx.sbcglobal.net)
Date: February 05, 2020 05:52PM

Joe,
You should really "un-hide"your email.
Herb

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Phil Ewanicki (---.res.spectrum.com)
Date: February 06, 2020 06:29PM

Even with fly rods you need to identify the right tool for the job. A 3 wt. rod is often fine for brookies but not for bass. A 7 1/2 foot rod is great for a 15' wide stream but not for wide bonefish flats. Generalized questions receive generalized answers which are generally not much help.

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: February 06, 2020 11:15PM

Phil, this was not a generalized question, he was specific to the application of the blank! Did you read the whole post?

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Phil Ewanicki (---.res.spectrum.com)
Date: February 07, 2020 12:29PM

Phil, Most people use a different rod for panfish than they do do for bass. Did you think about Joe's post after you read it?

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Camilo Lusis (---.cpe.net.cable.rogers.com)
Date: February 07, 2020 05:01PM

I am partial to Hook and Hackle's Xi Series fly rod blanks. They are a moderate fast blank which are very easy casting. Also the company occasionally has great sales on the blanks so you can get a good deal and try a few different models if budget allows.

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Tom Wood (76.151.207.---)
Date: March 12, 2023 07:02AM

Have a friend in Wisconsin who wants a fly rod for trout in rivers. I'm seeking advice as to length and weight and a recommendation for a CTS blank.
Many thanks

Options: ReplyQuote
Re: Recommendation for a good fly rod blank
Posted by: Evan Cobb (---.rochester.rr.com)
Date: March 12, 2023 08:04AM

I built my first fly rod last spring for small Brook trout and could also be used as a panfish rod. I don’t have nearly as much experience as most on here but I will say that build came out better than expected.

I used a Rainshadow Revelatiion 6’6” 2wt and it honestly casts smoother and almost just as far as my 8’6” Orvis Clearwater 5wt. After reading some reviews on here, my next fly rod build will be with the H&H Xi blanks or CTS if finances allow.



Edited 1 time(s). Last edit at 03/12/2023 08:06AM by Evan Cobb.

Options: ReplyQuote
Pages: 12Next
Current Page: 1 of 2


Sorry, only registered users may post in this forum.
Webmaster