SPONSORS
2024 ICRBE EXPO |
Custom Rod wanted
Posted by:
Brad Mitchell
(---.dyn.hsi.pldi.net)
Date: October 18, 2019 12:38PM
If this is posted in the wrong place, then I apologize....
I'm looking to have a couple of rods built for catfish but I don't want a regular catfish rod. I'm not looking for that big & heavy type of rod that will just overpower a nice 20-40 lb cat. That's the normal size caught in my lake for good cats. There are much bigger ones but it's just not the norm to hook one. I still want to enjoy the fight. My favorite rod ever was the Cabelas magtouch in terms of feel & toughness. I've landed 40 pounders and that was a an awesome fight but it was still awesome with a 5-10 pounder as well. Is it possible to find a blank that might be close to that feel? Spinning rod, maybe 7-8ft and throw about 2-4 ounces of lead maybe 50 yards max. Thank you gentelmen for the time. Re: Custom Rod wanted
Posted by:
Tom Kirkman
(Moderator)
Date: October 18, 2019 01:28PM
See here: www.tackleworks.org
....... Re: Custom Rod wanted
Posted by:
Brad Mitchell
(---.dyn.hsi.pldi.net)
Date: October 18, 2019 02:46PM
Tom Kirkman Wrote:
------------------------------------------------------- > See here: www.tackleworks.org > > ....... I have used that, unfortunately, there is no one listed in my state. I apologize if this is not the place to be doing this but I don't really know how else to go about trying to buy custom made rods. Re: Custom Rod wanted
Posted by:
Norman Miller
(---)
Date: October 18, 2019 03:25PM
In what state are you located?
Norm Re: Custom Rod wanted
Posted by:
Brad Mitchell
(---.dyn.hsi.pldi.net)
Date: October 18, 2019 03:41PM
Norman Miller Wrote:
------------------------------------------------------- > In what state are you located? > Norm I'm in Oklahoma. However, that's really not the problem. The problem is that a lot of the people listed on that rod builder search, are no longer. Emails just get returned. A rod maker doesn't have to be where I'm from. Just be good at what they do & I'm happy. Re: Custom Rod wanted
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: October 18, 2019 06:39PM
Try Schneider's Rod Shop. After all he is a sponsor. Re: Custom Rod wanted
Posted by:
Zac Huffman
(---.ks.ks.cox.net)
Date: September 02, 2020 11:48AM
Brad,
I am in Kansas and mainly build catfishing rods. Send me over an email if you still need one built. Sorry, only registered users may post in this forum.
|