I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

ICRBE 2020
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
BRC Rods
Bingham Enterprises
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rougarou Rods
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Pages: Previous12
Current Page: 2 of 2
Re: U-40 Dura Gloss LS Supreme
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: August 28, 2019 10:27PM

If I read the original post correctly, this rod was in use for almost a year. Who know what kinds of possible contaminates were on the rod! Certainly oil from fisherman's hands, perhaps fish slime and anything else it could have come in contact with. To expect to apply epoxy, which can be touchy at times under these conditions without some issues is questionable.

Options: ReplyQuote
Re: U-40 Dura Gloss LS Supreme
Posted by: Tom Harder (---.hsd1.mn.comcast.net)
Date: August 28, 2019 10:44PM

Oh Tom, one other thing, I'm just trying to learn whatever quirks LS Supreme has compared to what I'm used to, that's all. I'm not prepared to abandon a calculated decision I've made. I bought a lot of it (I bought 72 ounces of it). I just need to learn how it works and how it's different, that's all. There is no doubt it is different. And, yes, I had to add more to get it to settle down, I just had add a little bit on there (plus I'm talking about a couple minutes later...not some long period of time). I do think it doesn't level like FlexCoat does, it's different, that's all.

I made this decision for good reason and I'm very interested in the LS part of this product. I've only had one finish go bad and it was on a rod I built for myself. The finish was FlexCoat and the color preserver was as well. The rod is roughly 18 years old. It was only black and gold. A Chevron wrap. Well, for some reason the color preserver failed and it turned the top half to an almost green color and basically washed it all out to an almost goldish green color. It took about 15 years to fail. Get this, it didn't happen on the guides! This is why I made the switch. I switched from RadDancer to the LS Supreme because I felt it was an even better finish with the LS benefits. Plus, almost everyone who uses it gives it high marks. No, the problem is me. I have to learn what I need to do differently.

Mark Talmo, really good advice. I'm going to try and clean the rod with a product from KBS Coatings called KBS Klean it's probably similar to Windex. I've used it extensively for my composite rear grips and my cored exotic wood spinning reel seat inserts. I spray them both with KBS DiamondFinish Clear...a Urethane finish. I am so impressed with the outcome I'll try it to clean this rod with it as well. It's water based and super concentrated. I'm not all that fond of Simple Green and Windex has ammonia in it. Might as well minimize everything. I'm also going to try to add just a tiny bit of the Fisheye solution. Then I'll try it all. I just wish I knew what to expect. I'm just not used to this.



Edited 1 time(s). Last edit at 08/28/2019 10:48PM by Tom Harder.

Options: ReplyQuote
Re: U-40 Dura Gloss LS Supreme
Posted by: Tom Harder (---.hsd1.mn.comcast.net)
Date: August 28, 2019 10:46PM

Yes Phil, you're right. I did mention much of that earlier though.

Thanks!

Options: ReplyQuote
Re: U-40 Dura Gloss LS Supreme
Posted by: Tom Harder (---.hsd1.mn.comcast.net)
Date: August 29, 2019 12:20AM

Now I have another question; What am I supposed to clean my syringes out with if not for Acetone, Lacquer Thinner or Denatured Alcohol? And if it's okay, then how will that not potentially contaminate the finish? And what about cleaning of Sable brushes? Instructions say to use U-40 Brush Cleaner (which I have), Lacquer Thinner or Denatured Alcohol. Some of the reasoning above doesn't make sense to me (I know I'm slow). Since there is a chance of cross contamination, is it the finish that sensitive?

Thanks,

Tom



Edited 1 time(s). Last edit at 08/29/2019 12:43AM by Tom Harder.

Options: ReplyQuote
Re: U-40 Dura Gloss LS Supreme
Posted by: Tom Harder (---.hsd1.mn.comcast.net)
Date: August 29, 2019 04:52AM

Okay, as I prepared to apply a second coat (actually third) I cleaned the entire Rod with something like Windex

Mixed up enough LS Supreme and I added a tiny amount of Upol Fisheye eliminator (same as Smoothie). I dipped the small pointed end of my spatula in the solution about half way and let it run off and what was left on the tip of the spatula went into the LS Supreme. So, a very small amount. First of all, it does appear I indeed had some kind of silicone contamination, or whatever could prevent it from sticking, so with this next coat there were no "fisheyes". So I think many of you were on it right away. What confused me was that I worked on each guide scuffing them with a Scotch Brite pad. In my mind I thought the Denatured alcohol cleaned it up. I think it was still present. It also might have explained why it was spotty.

Anyway, the finish went on with little issue and it leveled beautifully. But, it took longer to level than I normally would expect. Especially given how thin it's consistency. I tend to want to work it until it's right, well, with LS Supreme, you're much better off letting it do it's thing. Get it close (be comfortable with it not looking perfect), move on and try not to touch it anymore.

But I think it also became clear that Tom's contention about the Denatured Alcohol. What normally happens with fisheyes, at least in my experience, you'll get it right, come back shortly and the material has moved away from the contamination. None of that this time. There was this one spot I described before on the wrap as wavy, that has me convinced of what Tom described. I had no such misbehavior this next coat.

I will say this though, this stuff keeps on leveling for quite a long time.

Thanks for the input everyone, I learned much from you and I very much appreciate it.



Edited 1 time(s). Last edit at 08/29/2019 05:24AM by Tom Harder.

Options: ReplyQuote
Re: U-40 Dura Gloss LS Supreme
Posted by: Tom Kirkman (Moderator)
Date: August 29, 2019 08:15AM

No need to clean syringes. Just keep them separate and maintain use of one for resin and the other for hardener.

If you have the U40 Brush Cleaner, you can simply put some in a cup, wipe the brush on a paper towel, dunk the brush in the cup and switch it around and then wipe it off and put it away. The brush cleaner doesn't evaporate very quickly so it's possible to leave the brush in for up to several weeks before the stuff will evaporate or you need to add more. Some guys never remove their brushes from the U40 Brush Cleaner. Just leave them in until the next use.


............

Options: ReplyQuote
Re: U-40 Dura Gloss LS Supreme
Posted by: Tom Harder (---.hsd1.mn.comcast.net)
Date: August 29, 2019 11:17AM

Thanks Tom, that's pretty much what I did with my brush. I keep those round plastic brush covers that come with my brushes so I slide that over it and keep it in a ziplock. Do you know what the brush cleaner is made of? I can't identify it by smell but I think it's a mix of a couple of different chemicals.

I'll consider that on my syringes. I typically fill them with cleaner, squirt it all back into the cleaner and then blot out the rest. Keep those in a ziplock as well.

Quite an experience this Silicone was, hope I don't revisit this again any time soon.

Thank you!

Tom

Options: ReplyQuote
Re: U-40 Dura Gloss LS Supreme
Posted by: Mark Talmo (71.147.59.---)
Date: August 29, 2019 01:49PM

Tom H.,
All said and done, I and presumably everyone else are glad to hear you finally achieved the finish wanted. I do not consider the silicone additive to be a cure but rather a Band-Aid on the problem. But drastic times can demand drastic measures. Sometimes it is better to apply a Band-Aid rather than bleeding all over the place. Congratulations on your perseverance!

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!!

Options: ReplyQuote
Re: U-40 Dura Gloss LS Supreme
Posted by: Tom Harder (---.hsd1.mn.comcast.net)
Date: August 29, 2019 03:32PM

Absolutely Mark. I've had this Fiesheye Eliminator sitting in my shop for a couple of years and never used it. It will also come in handy if I have issues spraying my composite rear grips. I do know that when Silicone turns up in one's shop it seems to spread out and shows up in odd and unexpected places. Having the Fisheye Eliminator on hand means I'll be able to solve these problems right here and right now so I'm really glad I have it. At the same time silicone may not have been my issue, it may have been due to the remnant Denatured Alcohol that Tom suggested.

Right now I'm just glad it's solved. I just took those guys to the airport for their Alaska trip so I'm super relieved that it's solved and on it's way to Alaska! I'm confident that my customer won't care in the least about the finish as he's catching one Salmon after the other up in Cold Bay Alaska! So, thanks for the suggestion Mark. Same for you other guys suggesting a possible silicone contamination!!



Edited 2 time(s). Last edit at 08/29/2019 03:35PM by Tom Harder.

Options: ReplyQuote
Re: U-40 Dura Gloss LS Supreme
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: August 29, 2019 09:03PM

I don't care for that particular finish. Tested it on a couple of wraps, gave it away.

Options: ReplyQuote
Pages: Previous12
Current Page: 2 of 2


Sorry, only registered users may post in this forum.
Webmaster