SPONSORS
2024 ICRBE EXPO |
lubing roller guides
Posted by:
chris-flying fish
(---.jaring.my)
Date: November 21, 2001 07:21PM
Could I please have some advice on what lube to service the aftco roller guides with? Some say, dismantle the rollers, then smear a bit of synthetic engine oil on the bushings. What works? Appreciate any advise. Thanks Re: lubing roller guides
Posted by:
Mike Bolt
(---.50.54.237.mhub.grid.net)
Date: November 21, 2001 08:47PM
I use any old high temp grease that I happen to have on hand. Oil is too loose. Re: lubing roller guides
Posted by:
Mike B.
(---.proxy.aol.com)
Date: November 21, 2001 10:04PM
Oil will work fine but only for one trip. Light grease is better. I've had my best luck with super lube which contains teflon and does not seem to wash off very easy. I get a really full season out of one servicing. Sorry, only registered users may post in this forum.
|