SPONSORS
2024 ICRBE EXPO |
Re: Fish Eyes in finish
Posted by:
Rick Sankey
(---.dsl.netins.net)
Date: May 01, 2019 08:20PM
Well just want to let everybody know how I came out on the fish eyes. I scuffed it up with a grey scotch brite pad and put another coat of Flex Coat on. It came out perfect. No fish eyes.
Will be ready for the customer on Friday. A save Ching Ching!!!!! Again want to thank everybody who had input on my problem. THIS SIGHT IS THE BEST!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Rick Re: Fish Eyes in finish
Posted by:
Joe Sullivan
(---.hsd1.fl.comcast.net)
Date: May 02, 2019 04:42PM
If I could add one thing that might help. Ive had the fish eye thing happen a lot on fish decals or labels several times. A trick that works for me is to put a drop of standard elmers school glue on it and smear lightly and thinly all over the area with your finger. Creates kind of a bond over the bad spot/s and comes out clear when coated with finish. Also works for me as a good practice to make sure no edges raise up when finish applied over labels/decals as it makes a seal over the whole thing that again, comes out clear when finish coated. I usually let the elmers dry for an hour or so just to be sure its totally dry before finishing with clear. Sorry, only registered users may post in this forum.
|