SPONSORS
2024 ICRBE EXPO |
Fuji K Series Stripper Guide
Posted by:
JOHN BURKE
(---.hsd1.al.comcast.net)
Date: January 16, 2019 03:00PM
Have not made a casting rod in a while using K series guides. This is a 7ft 3in. From the butt to the center of the
reel seat measures 13 inches. What would be the best distance to the stripper guide? Re: Fuji K Series Stripper Guide
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: January 16, 2019 04:14PM
19-21 inches. Tape and Test Re: Fuji K Series Stripper Guide
Posted by:
Mark Talmo
(71.147.59.---)
Date: January 16, 2019 07:37PM
Pointless to question Mr. Fuji! Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Fuji K Series Stripper Guide
Posted by:
JOHN BURKE
(---.hsd1.al.comcast.net)
Date: January 16, 2019 08:26PM
Thanks, Fuji Jim! Good luck in the Winter Classic. Re: Fuji K Series Stripper Guide
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: January 17, 2019 10:56AM
Ha! I'm out John...life gets in the way, sometimes. Rain and wind and sub-freezing temps on Sunday keep me from getting too depressed! You're obviously close by, John, how have we not met? Or have we? Re: Fuji K Series Stripper Guide
Posted by:
JOHN BURKE
(---.hsd1.al.comcast.net)
Date: January 17, 2019 02:21PM
Yes, Jim I am here in Mobile. I am friends with Bobby and Richard. I am in the ACFA.
I helped David and Bruce do the weigh-in at the first BOG. I have been repairing reels and rods since becoming disabled. That's how Richard and I became friends. Have done a few spinning rods lately and need help on this caster. I misplaced my build sheets from previous rods. I will come and introduce myself next time I see you. Thanks again. Re: Fuji K Series Stripper Guide
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: January 18, 2019 10:10AM
Look forward to it John. And I promise to show my face at a few meetings this year! Sorry, only registered users may post in this forum.
|