SPONSORS
2024 ICRBE EXPO |
Tip size of rod blank.
Posted by:
Scott Lawrence
(---.dyn.iinet.net.au)
Date: September 22, 2018 06:56PM
Looking at blanks for standup rod in 15kg class.Rainshadow Fsu56H has butt dia of 0.87 and tip top listed as 11. What does the 11 mean? Think it has something to do with roller guide sizes.I intend to use ring guides so I need a tip diameter in mm.Any help be great.
Tight lines Scott Re: Tip size of rod blank.
Posted by:
Tom Kirkman
(Moderator)
Date: September 22, 2018 07:20PM
11/64ths.
........... Re: Tip size of rod blank.
Posted by:
Scott Lawrence
(---.dyn.iinet.net.au)
Date: September 22, 2018 07:29PM
Thanks Tom. Re: Tip size of rod blank.
Posted by:
Lance Schreckenbach
(---)
Date: September 25, 2018 01:54PM
11/64ths = 4.3656 mm Re: Tip size of rod blank.
Posted by:
Bill Sidney
(---.gci.net)
Date: October 09, 2018 12:29PM
most tip sizes are the numbers over 64ths , ?? / 64 then do the math to get the mm numbers if needed for the tubs sizes ,
one inch = 2.54 cm. William Sidney AK Sorry, only registered users may post in this forum.
|