SPONSORS
2024 ICRBE EXPO |
CRB Blanks and American Tackle Blanks
Posted by:
Paul Wray
(---.hsd1.fl.comcast.net)
Date: August 01, 2018 04:48PM
I was looking at the Vertical Jigging Blanks from CRB and American Tackle. Oddly enough, they have the exact same specs. I was wondering, if they are made by the same manufactor and just relabeled? My family owns grocery stores, and I have seen many distributors do this, re-brand an item, and sell it as their own version. But physically, they are the same, made in the same place, just a different sticker and price.
Doing a little more research and I dug up this old post, which confirms my suspicion. [rodbuilding.org] So my question now is, is there any quality difference between the AT version and the CRB version? Thanks! Edited 1 time(s). Last edit at 08/01/2018 05:06PM by Paul Wray. Re: CRB Blanks and American Tackle Blanks
Posted by:
Chuck McIntyre
(172.58.83.---)
Date: August 01, 2018 08:04PM
I would say why would there be,yet there are many possibilities as to why not. Differences in proprietary pre-peg materials,etc. Take a chance on either one. You ought to be okay. Both produce quality products. Re: CRB Blanks and American Tackle Blanks
Posted by:
Scott Lawrence
(---.pa.qld.optusnet.com.au)
Date: August 01, 2018 10:26PM
Alan Hawk did a good write up on rebranding but it was aimed at spinning reels. Re: CRB Blanks and American Tackle Blanks
Posted by:
Don @ American Tackle
(---.biz.bhn.net)
Date: August 02, 2018 08:40AM
They ARE NOT the same blanks re-labeled...
I cannot speak for the CRB blanks but I can tell you the ATX VJ blanks are among the best on the market. They are widely used all over the world by custom builders and rod manufacturers alike. Give them a try, you will like them. _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Re: CRB Blanks and American Tackle Blanks
Posted by:
Paul Wray
(138.162.8.---)
Date: August 02, 2018 10:49AM
Don @ American Tackle Wrote:
------------------------------------------------------- > They ARE NOT the same blanks re-labeled... > > I cannot speak for the CRB blanks but I can tell > you the ATX VJ blanks are among the best on the > market. They are widely used all over the world by > custom builders and rod manufacturers alike. > > Give them a try, you will like them. Hey Don, Do you know if American Tackle makes the blanks for CRB? I have seen this be stated twice, once on RodBuilding.org and also on a French Rod Building website. Re: CRB Blanks and American Tackle Blanks
Posted by:
Don @ American Tackle
(---.biz.bhn.net)
Date: August 02, 2018 11:26AM
If you saw that claim from an American Tackle employee then I would say it is true, if not then I would say it is not. _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Sorry, only registered users may post in this forum.
|