SPONSORS
2024 ICRBE EXPO |
Rod Tubes
Posted by:
Jeff Horan
(---.nys.biz.rr.com)
Date: July 16, 2018 12:09PM
Is anyone making their own rod tubes? I'm building fly rods and think a hard tube would be nice to have. I'm wanting to do something I little nice than PVC. Any ideas? Re: Rod Tubes
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: July 16, 2018 12:27PM
Hello Jeff.
Go into the "Photos" section and use the search function; "Rod Tubes" and look at Mark Crouse's stuff. There is a good amount there. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: Rod Tubes
Posted by:
Bill Sidney
(---.gci.net)
Date: July 17, 2018 01:00AM
Mud hole has some good tubes with name on them look great William Sidney AK Re: Rod Tubes
Posted by:
Jean Scurtu
(---.hsd1.tx.comcast.net)
Date: July 24, 2018 09:33PM
How long must be the tube,because i have some fly rod tuibes,.(because i change some SAGE,G.LOOMIS IMX IN SPINNING RODS,and now the tiubes are not good for the spinning rods.).
Jean Scurtu HOUSTON,TX. Re: Rod Tubes
Posted by:
Larry Ohara
(---.clppva.fios.verizon.net)
Date: August 11, 2018 04:02PM
I saw Mark Crouse demonstrate how he makes his rod tubes at the EXPO...it takes additional time in lieu of buying them but if you got some skill I would go that route.
Nothing like a custom rod with a custom rod tube...that 's what it is about ! Larry Sorry, only registered users may post in this forum.
|