nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

2019 EXPO
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
Bingham Enterprises
Canada Rodbuildersupply
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
DBlue Fishing
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
Renzetti Inc.
Rod Components USA
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

Spine finder
Posted by: Paul James Vonderwall (---.pa.nsw.optusnet.com.au)
Date: July 03, 2018 02:26AM

Hi guys just wondering I'm going to make a
Spine finder
So what size bearings
Size pvc
The are the reducers at the and what else do
I need thanks

Options: ReplyQuote
Re: Spine finder
Posted by: Scott Lawrence (118.210.205.---)
Date: July 03, 2018 04:50AM

Hi Paul, if you go to the library section there is a article there called Homebrew spine finder.Sure there will be some info in it for you.Not sure but may need different size bearings for light blanks compared to heavy offshore blanks.Good luck.

Options: ReplyQuote
Re: Spine finder
Posted by: Bruce Tomaselli (---.sub-174-229-130.myvzw.com)
Date: July 04, 2018 07:57AM

Yep, I always threatened to build one. I just may do it this time.

Options: ReplyQuote

Sorry, only registered users may post in this forum.