SPONSORS
2024 ICRBE EXPO |
Spine finder
Posted by:
Paul James Vonderwall
(---.pa.nsw.optusnet.com.au)
Date: July 03, 2018 02:26AM
Hi guys just wondering I'm going to make a
Spine finder So what size bearings Size pvc The are the reducers at the and what else do I need thanks Re: Spine finder
Posted by:
Scott Lawrence
(118.210.205.---)
Date: July 03, 2018 04:50AM
Hi Paul, if you go to the library section there is a article there called Homebrew spine finder.Sure there will be some info in it for you.Not sure but may need different size bearings for light blanks compared to heavy offshore blanks.Good luck. Re: Spine finder
Posted by:
Bruce Tomaselli
(---.sub-174-229-130.myvzw.com)
Date: July 04, 2018 07:57AM
Yep, I always threatened to build one. I just may do it this time. Sorry, only registered users may post in this forum.
|