SPONSORS
2024 ICRBE EXPO |
Classic Rod Coat experience?
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: June 29, 2018 07:06PM
I have been a happy Threadmaster epoxy user for many years, but was just asked to try Classic Rod Coat. What are the users experience with this epoxy?
I have been doing some tests with it and the workability is quite good. Any comments on, viscosity, pot life, curing time?. Re: Classic Rod Coat experience?
Posted by:
David Parsons
(---.s16300.c3-0.drf-cbr1.atw-drf.pa.cable.rcncustomer.com)
Date: June 29, 2018 09:16PM
Just put it on 2 rods minutes ago is nice ,it takes longer then flex coat to cure , flows on nice ,good pot life. Re: Classic Rod Coat experience?
Posted by:
Pat Doyle
(---.socal.res.rr.com)
Date: June 30, 2018 06:52AM
Had used Flex Coat for around thirty years, Jose at Seeker asked me to try the Classic which I did, and find it to be very similar but actually like it better in regards to viscosity and pot life. Have not noticed much difference in curing time.
Pat Re: Classic Rod Coat experience?
Posted by:
ben belote
(---.zoominternet.net)
Date: July 01, 2018 04:33PM
the longer the pot life, the longer the curing time.. Re: Classic Rod Coat experience?
Posted by:
Eric MONTACLAIR
(---.subs.proxad.net)
Date: July 02, 2018 01:14AM
Correct me if I’m wrong.
Classic Road Coat is label led as polymer, I not saw Epoxy stated. So is Classic Rod Coat epoxy or other type ? I not chime, just want to know :-) ________________________________________ @+ Eric [www.emfishing.fr] Re: Classic Rod Coat experience?
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: July 02, 2018 01:36AM
Epoxies are polymers. Sorry, only registered users may post in this forum.
|