I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Classic Rod Coat experience?
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: June 29, 2018 07:06PM

I have been a happy Threadmaster epoxy user for many years, but was just asked to try Classic Rod Coat. What are the users experience with this epoxy?

I have been doing some tests with it and the workability is quite good.

Any comments on, viscosity, pot life, curing time?.

Options: ReplyQuote
Re: Classic Rod Coat experience?
Posted by: David Parsons (---.s16300.c3-0.drf-cbr1.atw-drf.pa.cable.rcncustomer.com)
Date: June 29, 2018 09:16PM

Just put it on 2 rods minutes ago is nice ,it takes longer then flex coat to cure , flows on nice ,good pot life.

Options: ReplyQuote
Re: Classic Rod Coat experience?
Posted by: Pat Doyle (---.socal.res.rr.com)
Date: June 30, 2018 06:52AM

Had used Flex Coat for around thirty years, Jose at Seeker asked me to try the Classic which I did, and find it to be very similar but actually like it better in regards to viscosity and pot life. Have not noticed much difference in curing time.

Pat

Options: ReplyQuote
Re: Classic Rod Coat experience?
Posted by: ben belote (---.zoominternet.net)
Date: July 01, 2018 04:33PM

the longer the pot life, the longer the curing time..

Options: ReplyQuote
Re: Classic Rod Coat experience?
Posted by: Eric MONTACLAIR (---.subs.proxad.net)
Date: July 02, 2018 01:14AM

Correct me if I’m wrong.
Classic Road Coat is label led as polymer, I not saw Epoxy stated.

So is Classic Rod Coat epoxy or other type ?

I not chime, just want to know :-)

________________________________________
@+
Eric
[www.emfishing.fr]

Options: ReplyQuote
Re: Classic Rod Coat experience?
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: July 02, 2018 01:36AM

Epoxies are polymers.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster