SPONSORS
2024 ICRBE EXPO |
Spinning rod blank for Skipping docks
Posted by:
Joshua White
(---.sub-174-218-133.myvzw.com)
Date: January 22, 2018 03:26PM
Any suggestions for a spinning rod blank setup for skipping docks with braid to flouro leader and weightless soft plastics for bass? Re: Spinning rod blank for Skipping docks
Posted by:
Dale Foster
(---.hsd1.or.comcast.net)
Date: January 22, 2018 05:08PM
St.Croix 5'10" TBS510MXF Great for Skipping docks Re: Spinning rod blank for Skipping docks
Posted by:
James Taylor
(---.wavecable.com)
Date: January 22, 2018 06:06PM
From RainShadow we’d recommend our REVELATION lineup - [www.rainshadowrodblanks.com]
REVS62M or 68M – Depending what length you’d like Also the REVS68MXF James Taylor Batson Enterprises BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com Re: Spinning rod blank for Skipping docks
Posted by:
Joshua White
(---.sub-174-218-133.myvzw.com)
Date: January 22, 2018 11:36PM
Ok thanks the customer is 6'6 so a 6'8-7'0ft is what I was considering I'm smoking those two blanks over for now. He wants to go all out on trimming weight and increasing sensitive. What guides or series of guides would you suggest for this task? Re: Spinning rod blank for Skipping docks
Posted by:
Alex Weissman
(---.dhcp.embarqhsd.net)
Date: January 23, 2018 01:41PM
I put Minima guides on a store bought rod last year to increase the sensitivity and it worked great. Re: Spinning rod blank for Skipping docks
Posted by:
James Taylor
(---.wavecable.com)
Date: January 23, 2018 01:52PM
Joshua White Wrote:
------------------------------------------------------- > Ok thanks the customer is 6'6 so a 6'8-7'0ft is > what I was considering I'm smoking those two > blanks over for now. He wants to go all out on > trimming weight and increasing sensitive. What > guides or series of guides would you suggest for > this task? So will he want to go with Titanium guides? For us we'd recommend ALPS Y-Guide TIY and down to ALPS F-Guide TIPF - there is SS316 versions as well. This is from a basic blueprint for our REVS68M for guide placement (you can go smaller), measured from tip top. 1st - 06 - 4.5" 2nd - 06 - 9.5" 3rd - 07 - 15" 4th - 07 - 21" 5th - 10 - 28" 6th - 16 - 35.5" 7th - 25 - 44" James Taylor Batson Enterprises BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com Sorry, only registered users may post in this forum.
|