nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.

ICRBE 2020
CCS Database
Int. Custom Rod Symbol
Common Cents Info
American Tackle
Anglers Rsrc - Fuji
Anglers Workshop
BRC Rods
Bingham Enterprises
Cork Specialties LLC
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
REC Components
Renzetti Inc.
Rod Builders Warehouse
RodHouse France
RodMaker Magazine
RodMaker Blog
Schneiders Rod Shop
SeaGuide Corp.
The Rod Room
Trondak U-40
Utmost Enterprises

composite butt end
Posted by: Jeff Thomson (65.104.119.---)
Date: November 16, 2001 02:26PM

My factory-built St. Croix Legend Elite has some sort of composite butt end that is shaped to fit the cork handle. What is it, and where can I get some? Thanks.

Options: ReplyQuote
Re: composite butt end
Posted by: Custom Tackle Supply (64.53.115.---)
Date: November 16, 2001 04:36PM

It is referred to as sveral names, rubberized cork, rubberized composite cork, rubberized burl/composite cork. Similar to gasket material in appearance, could be the same?? Whatever it really is, we have it in cork ring type form. 1-1/4" O.D. - 1/2" thick, with a 1/4" hole. You plug the hole with same type stopper or use a metal or rubber butt plug. You can contact us at Custom Tackle Supply, we've got it.

Bob McKamey

Options: ReplyQuote

Sorry, only registered users may post in this forum.