SPONSORS
2024 ICRBE EXPO |
Shade space
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: July 07, 2017 05:29PM
I am looking at wrapping a spider wrap,and want to shade or fade some colors, so on the spacing chart it got 5 passes up to 12 passes. So if i am going to shade, would i need to have say like 10 passes, instead of like 6 or 7 passes on my spider wrap, to have enough room for a decent fade or shade? Re: Shade space
Posted by:
Tom Kirkman
(Moderator)
Date: July 07, 2017 07:49PM
The more threads per color the more subtle the shade. You could do it in three, but it will be fairly distinct. It really just depends on how subtle you want the shade to be, or not.
............... Re: Shade space
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: July 07, 2017 09:06PM
Ok,but im concerned about how much space i have to shade, like say i do 7 or 8 passes,then i would have only that many passes do do the shade. Like the spider deco, the spider part in the middle of the deco. Would only be like2or 2.5 mm to do the shade, 7 or 8 passes. How would i go about that? Maybe do like a 12 pass spacing? But the rod is a med heavy blank. And that many passes would be over kill on a rod like that? Re: Shade space
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: July 07, 2017 09:18PM
Try it and see how you like it. If you don't like it cut it off and try something different.
Norm Re: Shade space
Posted by:
lorenzo tellez
(---.hsd1.il.comcast.net)
Date: July 07, 2017 09:48PM
Yea, thats the only way i will find out, haha, well you all have a good one,. Sorry, only registered users may post in this forum.
|