SPONSORS
2024 ICRBE EXPO |
fraction-decimal - MM quick chart
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: June 25, 2017 01:40PM
A useful guide for builders copy it or book mark it for your self to reference sizing various parts
[hamuniverse.com] The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: fraction-decimal - MM quick chart
Posted by:
Mud Hole Custom Tackle
(---.res.bhn.net)
Date: June 26, 2017 04:58PM
Free is great but we also offer a popular chart with similar information - it is actually sticker you can place on your bench as a handy reference:
[www.mudhole.com] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: fraction-decimal - MM quick chart
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: June 26, 2017 05:18PM
I could make a comment to your post but I will refrain. The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: fraction-decimal - MM quick chart
Posted by:
Tom Kirkman
(Moderator)
Date: June 26, 2017 07:18PM
Just remember, they pay to help offset the cost of the forum you put your original post on. Don't fault them for making a commercial post - they've earned the right to do it.
................. Re: fraction-decimal - MM quick chart
Posted by:
Gib Portwood
(---.lightspeed.rcsntx.sbcglobal.net)
Date: June 27, 2017 11:25AM
I made a similar chart in excel awhile back. For me, I easily get tripped reading the measurements in simplest form. So the format of this chart helps me immensely. After seeing the guides listed here, I went back and added millimeters to it. For anyone interested, you can see it here: [1drv.ms]
Everything is formatted to print off nice and neat on one page. The first column shows what numerator of a fraction in 64th of an inch (i.e. 4 = 4/64ths). The second column is that fraction expressed in simplest form (i.e. 4/64ths simplifies to 1/16th). The third column in the fraction shown in number format to 4 decimals. The fourth column is the fraction shown in millimeters. Note: the spreadsheet has two tabs on it: locked and unlocked. On the locked tab, you cannot access any of the cells with data in it. The unlocked tab has the same chart but it is not protected, so you can see the formats and formulas I used. If you want to print this out for your own use, print out the chart on the "locked" tab. -------------- Re: fraction-decimal - MM quick chart
Posted by:
John Cates
(---.sub-70-195-202.myvzw.com)
Date: June 27, 2017 03:17PM
We have had a similar chart on our website for years. It's a free download and you can print it and put it anywhere.
Here's a link, it's halfway down the page [flexcoat.com] Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: fraction-decimal - MM quick chart
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: June 27, 2017 05:55PM
It always a good idea and the right thing to do in supporting our sponsors !! Re: fraction-decimal - MM quick chart
Posted by:
Mark Talmo
(---.dsl.lsan03.sbcglobal.net)
Date: June 29, 2017 01:09AM
Matthew,
Thank you for affording all of use with a COMPREHENSIVE conversion chart. While I, others as well, may have a similar fractional-decimal-mm-letter-number chart used especially for machining, I have never seen a chart including the “0.08333 factor”. Very good to know. THANKS!!! Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Sorry, only registered users may post in this forum.
|