SPONSORS
2024 ICRBE EXPO |
Point blank perfect fit hardware
Posted by:
mike langevin
(---.sub-70-214-83.myvzw.com)
Date: June 20, 2017 02:41PM
If I want a pb701mhf blank is there a resource that would indicate all the perfect fit hardware that would fit that blank? Or do I have to order the blank first and measure for all the winding checks and stuff? Re: Point blank perfect fit hardware
Posted by:
Mel Shimizu
(---.socal.res.rr.com)
Date: June 20, 2017 03:40PM
If you are buying from Mudhole, then call them to furnish all your components. Of course you need to tell them the dimensions of your handle but they should be able to do it for you. Re: Point blank perfect fit hardware
Posted by:
bud bassett
(---.new.res.rr.com)
Date: June 20, 2017 07:04PM
Call Anglers Resource. They will set you up. Re: Point blank perfect fit hardware
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: June 20, 2017 10:11PM
The specs are there for each blank, the taper on the last 12-14 inches is pretty non-existent less than .5 mm. Re: Point blank perfect fit hardware
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: June 21, 2017 09:45AM
Diameter of 14.26mm o the 701MHF. Order 14.5mm winding checks. Re: Point blank perfect fit hardware
Posted by:
mike langevin
(---.sub-70-214-79.myvzw.com)
Date: June 21, 2017 11:00AM
Thanks I'm on it! Sorry, only registered users may post in this forum.
|