SPONSORS
2024 ICRBE EXPO |
PA rod builders
Posted by:
Ken Brown 2
(---.115.230.21.res-cmts.mtp2.ptd.net)
Date: March 10, 2017 02:16PM
From what I have seen on here and searches on the net, it seems like there are very few rod builders in PA. I have noticed a few here and there but not that many. Im located in the Poconos if there are any other PA people here. Re: PA rod builders
Posted by:
Roger Templon
(---.aoo.pa.atlanticbb.net)
Date: March 10, 2017 06:19PM
I'm a rodbuilder from Altoona !
Rog Re: PA rod builders
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: March 10, 2017 06:38PM
Carbon County. (hobby) Edited 2 time(s). Last edit at 03/10/2017 08:00PM by Lynn Behler. Re: PA rod builders
Posted by:
Bruce Tomaselli
(---.altnpa.east.verizon.net)
Date: March 10, 2017 07:16PM
I'm a hobby rod builder from Cambria County. Re: PA rod builders
Posted by:
Barry Weaver
(---.hsd1.pa.comcast.net)
Date: March 10, 2017 08:09PM
my shop is in Elizabethtown,,Lancaster County I am a fulltime builder. Re: PA rod builders
Posted by:
Jon Kistler
(---.102.221.100.res-cmts.t132.ptd.net)
Date: March 10, 2017 08:46PM
I live in Palmerton, PA Re: PA rod builders
Posted by:
David Parsons
(---.c3-0.drf-ubr1.atw-drf.pa.cable.rcn.com)
Date: March 11, 2017 09:08AM
I live near the Philadelphia international airport with family in the poconos did a lot of fishing as a teenager up there send me a email. Re: PA rod builders
Posted by:
Jeff Shafer
(---.c3-0.drf-ubr1.atw-drf.pa.cable.rcn.com)
Date: March 11, 2017 08:07PM
I'm in the Lehigh Valley, have been building since mid 80's. Re: PA rod builders
Posted by:
Mike Canavan
(---.stny.res.rr.com)
Date: March 11, 2017 09:27PM
Bradford county. Build mostly rods for family and NY Finger Lakes fishermen Re: PA rod builders
Posted by:
Ken Brown 2
(---.115.230.21.res-cmts.mtp2.ptd.net)
Date: March 12, 2017 04:15PM
Sounds like most of you are fairly far away from me. I used to live in Emmaus then moved up to Swiftwater.
I have built 2 rods so far, working on a third. I am also re-purposing a store bought rod. I just marbled the grips and i think it came out pretty sweet! Yes..I am a rod building addict now! A word you have used in your post has been banned from use. Please use a different word or contact the forum administrators.
Sorry, only registered users may post in this forum.
|