SPONSORS
2024 ICRBE EXPO |
Antique rod restoration
Posted by:
Ken Brown 2
(---.115.230.21.res-cmts.mtp2.ptd.net)
Date: March 02, 2017 07:29PM
I have a couple of my grandfather's old rods that I was looking to restore. There are no brand markngs on any of them so I cant begin to determine what they are. The glass screws into the top of the reel seat that is a forged metal seat. There are also pieces missing because the reels that are are on them are taped on.
I am merely restoring them for myself so I won't be doing anything crazy with them except for replacing the butt section of the cork along with the wraps. Has anyone restored old rods like this, or aware of a resource that is good for this kind of stuff? Re: Antique rod restoration
Posted by:
Donald La Mar
(---.lightspeed.lsvlky.sbcglobal.net)
Date: March 02, 2017 08:11PM
Ken
Michael Sinclair's "The Bamboo Rod Restoration Handbook" is, as you would guess, all about old bamboo rods. But, it is full of all sorts of tips, techniques, processes, and resources applicable to rods regardless of material. Re: Antique rod restoration
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: March 02, 2017 10:25PM
sounds like they are casting rods right ? and your missing the skip and screw pirces to hold the reel in place.
you can make new skips with a piece of brass or steel about one quarter inch thick and 7/8 ths long round one end and drill a hole {guessing the hole in the seat is 1/4 inch} then tap it 1/4 -20 and hit the hard ware store for a couple of round head screws and take a dremel and a round drum stone and just grind a shallow trough 1/8 from the drilled and tapped hole and you got that part fixed. are you looking to use new guides or doing it true to the era ? the handles could be cast pot metal or cast aluminum more than likely they are aluminum they used that since the 30's for rod handles. I would take them out doors after stripping off the old wrappings and guides and wipe them down with acetone and they will clean up like new then start your re wrapping and finishing processes and you will have some good memories of your grandfather for years to come. If I can help you feel free to ask I will give you the best answers from my experience I can Matt The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Antique rod restoration
Posted by:
Ken Brown 2
(---.115.230.21.res-cmts.mtp2.ptd.net)
Date: March 03, 2017 07:13AM
The first thing I need to do is to clean off all the glue residue that is left on the reel seat of the one rod. I could just use some steel wool for that, but I want to attempt to keep everything intact if I can. I did work on the one last night and I found out that the rod actually gets screwed into the reel seat. The butt cork section on the one also gets screwed in, while the other seems to be sitting on the blank. Yes they are all casting rods. I would love to be able to find the guides from the era so I can keep them as true as possible. Like I mentioned before, I won't be selling them so its not super important but I think having an antique rod with brand new guides makes it look a little weird. The craziest part is that the reels still work with very little restoration required. They were dirty but they all function. Re: Antique rod restoration
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: March 03, 2017 11:12AM
Hello Ken.
Can you post some pictures? I have a bunch of old guides, who knows I may have a match to what you need. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: Antique rod restoration
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: March 03, 2017 11:25AM
Yes Ken either post some pics or e mail me some and can give you better ideas and may be some of the guides you might need if you can clean off the glue that way do it but if it is from the tape you could get it off quick with dome denatured alcohol have a good day The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Antique rod restoration
Posted by:
Ken Brown 2
(---.115.230.21.res-cmts.mtp2.ptd.net)
Date: March 03, 2017 11:33AM
I would post some pics..but not sure how i do that? I have to create a separate gallery login? Re: Antique rod restoration
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: March 03, 2017 01:18PM
Hello Ken.
Yes it is a separate log in but you can use the same password if you want to. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: Antique rod restoration
Posted by:
Mark Talmo
(---.dsl.lsan03.sbcglobal.net)
Date: March 04, 2017 01:30AM
Ken,
Congratulations and my hat is off to you. Your Grandfather would be proud and so will you when fishing the most special rods you will ever fish! Keep asking questions on this site and you will receive loads of assistance from many veterans much more qualified than me. One thing this newbie did with the NON-INSERT guides of a similar vintage rod was, obviously after removing them from the rod, soaking them in Tarnix. They really came out nice. But after the Tarnix, I also soaked them in a water-baking soda bath to neutralize the acidity. Keep us (at least me) posted. Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Antique rod restoration
Posted by:
Ken Brown 2
(---.115.230.21.res-cmts.mtp2.ptd.net)
Date: March 04, 2017 02:46PM
Thanks for the replies. I think at this time I will not do the restoration. There are several factors as to why not but the main reason is that I dont want to trash the rods. For now, I will clean them up and hang them on my office wall. When I feel more confident with my rod building skills, I may attempt at a future date. Sorry, only registered users may post in this forum.
|