SPONSORS
2024 ICRBE EXPO |
? about slip chucks from Mudhole
Posted by:
Kevin Kelly
(---.hsd1.ga.comcast.net)
Date: February 03, 2017 10:06AM
I'm thinking about getting a slip chuck to use for finishing in my power wrapper. It seems that rather than mounting them to a motor shaft, i can just chuck them in the jaws of the chuck on my Clemens. Mudhole lists two such chucks, the Flexcoat and their own CRB. The CRB is half the cost; is there any reason to get the more expensive one? Wouldn't they both work the same? Re: ? about slip chucks from Mudhole
Posted by:
John Cates
(---.sub-70-195-223.myvzw.com)
Date: February 03, 2017 12:15PM
Great question!
Ours is precision milled in the USA with the quality you expect from Flex Coat products and spinns true. Sage, Loomis, St. Croix and most other Rod Manufacturers use our "original" slip clutch. Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: ? about slip chucks from Mudhole
Posted by:
John Cates
(---.sub-70-195-223.myvzw.com)
Date: February 03, 2017 12:17PM
...In our opinion you will have no problems putting this in the chuck of the Clemens. Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: ? about slip chucks from Mudhole
Posted by:
Get Bit Outdoors.Com
(---.biz.bhn.net)
Date: February 03, 2017 03:39PM
The Flex Coat Slip Clutch is a great tool for any builder. We sell quite a few and am yet to hear anything but great reviews. Link Below.
[www.getbitoutdoors.com] Tight Lines and Bull's-eyes, Get Bit Outdoors 407-542-7840 www.GetBitOutdoors.com www.facebook.com/GetBitOutdoors Re: ? about slip chucks from Mudhole
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: February 03, 2017 08:01PM
I've had a Flex-Coat slip chuck for many years without any problems. Dennis J. Danku (Sayreville,NJ) Re: ? about slip chucks from Mudhole
Posted by:
Eric MONTACLAIR
(---.fbx.proxad.net)
Date: February 04, 2017 01:29AM
I use the CRB, fine slip chuck.
I had not used te Flex Coat, maybe it is better, maybe not :-) ________________________________________ @+ Eric [www.emfishing.fr] Re: ? about slip chucks from Mudhole
Posted by:
Kevin Kelly
(---.hsd1.ga.comcast.net)
Date: February 04, 2017 10:55PM
Thanks for the answers. I think I got what I needed. Re: ? about slip chucks from Mudhole
Posted by:
larry basilio
(---.phlapa.fios.verizon.net)
Date: February 05, 2017 09:45AM
Flex coat Sorry, only registered users may post in this forum.
|