SPONSORS
2024 ICRBE EXPO |
Holographic metallic thread
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: November 20, 2016 10:26AM
I've used Gudbrod silver holographic metallic winding thread, but am getting low. Anyone know of other wrapping threads available in silver holo? I know there are sewing or embroidery threads, but would prefer to stick with rod wrapping threads if possible. Re: Holographic metallic thread
Posted by:
Bill Sidney
(---.gci.net)
Date: November 20, 2016 01:56PM
lots of rod builders use the thread that you are trying to avoid , just for the color's that you can't get any place else an realy like them William Sidney AK Re: Holographic metallic thread
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: November 20, 2016 03:55PM
Thanks, William, I know that. I prefer to use products designed for rodbuilding, but will go to the sewing shop if necessary. Re: Holographic metallic thread
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: November 21, 2016 12:02PM
Hello Michael.
Are you talking about the "Electra Metallic Hologram Braid" #5030 or the "Prizm Holographic Thread" #5002? Sulky has what they call "Holoshimmer Thread" which is a "Flat Polyester Metallized Metal Film" #6001. Sold by a few companies including MudHole. Personally I would never call them "Thread" as they are a "flat ribbon" and not a "thread", to me "thread" is round, just my .02. Bob, New Bern, NC. Re: Holographic metallic thread
Posted by:
Tommy Simonsen
(---.banetele-cust.com)
Date: November 21, 2016 04:51PM
I guess for decorative wrappings you can use whatever you have laying around. I've used a lot of stuff from my fly tying chest myself. And even thin copper thread. Never used sewing thread though, anyone know what size to use there too align to the Gudebrod size A? Re: Holographic metallic thread
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: November 21, 2016 07:02PM
What I'm looking for is thread, round, not a flat product. Re the size equivalence, I think there are converters on line, do a search. Re: Holographic metallic thread
Posted by:
Tommy Simonsen
(---.banetele-cust.com)
Date: November 22, 2016 08:23AM
The product you are looking for is that Gudebrod HT Electra? Re: Holographic metallic thread
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: November 22, 2016 09:08AM
Michael - I came across this when putting an order together. When I saw it thought of your post. Know nothing about this stuff.
[www.mudhole.com] Norm Re: Holographic metallic thread
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: November 24, 2016 08:50AM
The thread I have is 9002 HT metallic Electra Silver.A size. Re: Holographic metallic thread
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: November 24, 2016 08:59AM
Norman, thanks, will keep that Mudhole product in mind. It may do just fine. Would really like to see it. Sorry, only registered users may post in this forum.
|