SPONSORS
2024 ICRBE EXPO |
CP Question
Posted by:
Brad Pitts
(---.lightspeed.tulsok.sbcglobal.net)
Date: November 14, 2016 12:25AM
I am new to rod building and I am currently building my first rod. Here is my question. I applied CP to my wrap and there were places where I got little bubbles from the CP. I tried to smooth them out the best I could with my brush. After drying there is still a hint of white residue. I don't want this to show in my finish. What is the best way to clean this up? Brad Pitts Re: CP Question
Posted by:
Randy Weakley
(47.150.13.---)
Date: November 14, 2016 02:05AM
Someone more experienced step in if I'm wrong, but that should disappear in the finish. I once completely lost the tiger effect behind a milky appearance after applying 2 or 3 coats of CP to an overwrap. But at Tom's suggestion, I applied finish. The effect came back with no hint of the milkiness. Re: CP Question
Posted by:
Brad Pitts
(---.lightspeed.tulsok.sbcglobal.net)
Date: November 14, 2016 10:28PM
Thanks Brad Pitts Sorry, only registered users may post in this forum.
|