SPONSORS
2024 ICRBE EXPO |
Adjustable Epoxy Pot Life
Posted by:
Tom Kirkman
(Moderator)
Date: September 13, 2016 08:44PM
The Volume 19 #5 issue of RodMaker is at the printer now. I think it's an especially good issue and one article will be of particular interest to those who have reported problems working with epoxy in hot weather situations. There is a means to manually adjust the pot life of any epoxy to suit the user, which will be of great benefit to those working in non-climate controlled shops either in very cold or very hot weather. It will not change the characteristics of the epoxy in any way. Details in the new issue which mails the first of October.
................... Re: Adjustable Epoxy Pot Life
Posted by:
jack black
(99.196.44.---)
Date: September 14, 2016 07:44AM
if i subscribe now will it be in time to get this issue? Re: Adjustable Epoxy Pot Life
Posted by:
Tom Kirkman
(Moderator)
Date: September 14, 2016 07:54AM
Yes. It won't mail until October 1st.
............ Re: Adjustable Epoxy Pot Life
Posted by:
Mark Talmo
(---.dsl.lsan03.sbcglobal.net)
Date: September 15, 2016 12:58AM
Tom,
Does it include procedures other than working faster / more efficiently once the epoxy is mixed? Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: Adjustable Epoxy Pot Life
Posted by:
Tom Kirkman
(Moderator)
Date: September 15, 2016 08:01AM
Yes - you do not have to alter your technique in any way.
.............. Re: Adjustable Epoxy Pot Life
Posted by:
Robert Dittert III
(---.lightspeed.hstntx.sbcglobal.net)
Date: September 17, 2016 02:25PM
Looking forward to getting this issue. Sorry, only registered users may post in this forum.
|