SPONSORS
2024 ICRBE EXPO |
help me out on extending a rod
Posted by:
Jose Sanchez
(---.mia.fl.atlanticbb.net)
Date: June 01, 2016 03:11PM
So im trying to extend the bottom part of a rod i just bought the blank is a gator t70h and would like to extend it about 2 more feet i have a piece of blank that would fit perfectly and its about 5 feet long it will fit nice and snug with of course some arbors will use dry wall mesh as arbors and rod bond for the epoxy slow cure since this will be a pier rod casting around 8oz to 12oz i need a long rear grip would be as long as i have extended the rod 24" my question here is should i install the reel to the blank or to the extension part? i have made a couple of butt extension already but they were around 20" so am not sure how good will it hold up Re: help me out on extending a rod
Posted by:
Jose Sanchez
(---.mia.fl.atlanticbb.net)
Date: June 01, 2016 03:32PM
Tom Kirkman Wrote:
------------------------------------------------------- > [www.rodbuilding.org] > > > ............... thank you Re: help me out on extending a rod
Posted by:
Leonard Letukas
(---.sctnpa.east.verizon.net)
Date: June 11, 2016 11:47PM
Tom I have an old Berkeley cherry wood rod I think they called it and it has the aluminum extension you talk about it is a med action freshwater rod Sorry, only registered users may post in this forum.
|