SPONSORS
2024 ICRBE EXPO |
Removal front hood dos seat?
Posted by:
Adam Lathrop
(---.hsd1.tx.comcast.net)
Date: May 19, 2016 08:14PM
Is the front stationary hood on a fuji dps seat removable? Re: Removal front hood dos seat?
Posted by:
Tom Kirkman
(Moderator)
Date: May 19, 2016 09:14PM
Yes but it takes a little technique and patience.
........... Re: Removal front hood dos seat?
Posted by:
Adam Lathrop
(---.hsd1.tx.comcast.net)
Date: May 20, 2016 12:35AM
I cut one in half waiting on a response. Seems like you'll need a little tool to pop the front hood alignment slot loose.
Can you divulge your technique? Re: Removal front hood dos seat?
Posted by:
Tom Kirkman
(Moderator)
Date: May 20, 2016 07:20AM
It's in the magazine and bit lengthy for me to put in short message on the forum. Photos are a big help in understanding it, which were with the article.
I'll try to write something up when I have more time later today. ............ Re: Removal front hood dos seat?
Posted by:
Adam Lathrop
(141.197.12.---)
Date: May 20, 2016 09:08AM
Dang Tom I guess i don't have access to the back issue with said article either. Re: Removal front hood dos seat?
Posted by:
Tom Kirkman
(Moderator)
Date: May 20, 2016 10:12AM
Look in V15 #5 for the specifics.
Essentially you have to insert a small screwdriver into the slot between the hood and the nylon body and pry the hood off the tiny stop in the alignment track. From there it'll just slide off. The trick is to not damage or mar the softer nylon body. Some patience and a slim enough tool should get you by. .......... Re: Removal front hood dos seat?
Posted by:
Adam Lathrop
(141.197.12.---)
Date: May 20, 2016 01:26PM
Thanks Tom Sorry, only registered users may post in this forum.
|