SPONSORS
2024 ICRBE EXPO |
Fuji Resin and Toray Resin
Posted by:
Eliseu Cherene
(---.petrobras.com.br)
Date: April 16, 2016 04:41AM
Good morning, Acquires these two resins in my visit to Japan in 2013. Since then can buy directly. I found very interesting and not use another brand. They work as follows:
Fuji resin catalyst uses 1/3 to 1 resin, as Toray uses 1/2 to 1 catalyst resin. Details Fuji that is denser and dried in four hours. Toray is much liquid as can view the video and dried over 6 hours. impressive finishes, both have UV filter. Big hug to everyone. Fuji Resin. [www.youtube.com] Toray Resin. [www.youtube.com] Edited 1 time(s). Last edit at 04/16/2016 04:42AM by Eliseu Cherene. Re: Fuji Resin and Toray Resin
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 16, 2016 11:38AM
Sounds like a good American made Auto Clear never seen a car finish yellow Bill - willierods.com Re: Fuji Resin and Toray Resin
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: April 16, 2016 02:49PM
Bill, you better watch the videos, Auto Clear WILL NOT do what he is doing! Re: Fuji Resin and Toray Resin
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 16, 2016 03:08PM
Why not ?? Bill - willierods.com Re: Fuji Resin and Toray Resin
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: April 16, 2016 04:13PM
Bill, because it is too thin. Re: Fuji Resin and Toray Resin
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: April 16, 2016 06:13PM
So is Permagloss But it works
Have you mixed it any of them and tried them Depending on the speed of the turner A faster turner will hold the thinnest of finishes That video needs a larger brush Bill - willierods.com Re: Fuji Resin and Toray Resin
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: April 16, 2016 10:02PM
Bill, I agree they both (Auto Clear and Perma Gloss) work, but it takes a lot of coats to get good coverage to protect the thread wraps, that's labor intensive and not productive! Whereas, many can get good coverage with one coat of two part epoxy such as shown in the videos.
I also agree that the video maker needs a wider brush. Re: Fuji Resin and Toray Resin
Posted by:
Eliseu Cherene
(---.petrobras.com.br)
Date: April 16, 2016 11:04PM
What did you think of resins? Re: Fuji Resin and Toray Resin
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: April 16, 2016 11:31PM
Cannot tell much about them from a video! The viscosity looked good. Re: Fuji Resin and Toray Resin
Posted by:
Eliseu Cherene
(---.petrobras.com.br)
Date: April 16, 2016 11:40PM
Thanks my friend Re: Fuji Resin and Toray Resin
Posted by:
Jerry Poindexter
(---.tx.res.rr.com)
Date: April 17, 2016 12:42AM
Is either finish available to the US market in 8-16oz quantities? Re: Fuji Resin and Toray Resin
Posted by:
Eliseu Cherene
(---.petrobras.com.br)
Date: April 17, 2016 12:47AM
I bought in the amount of 1.5 kg Re: Fuji Resin and Toray Resin
Posted by:
Chris Tulk
(184.151.190.---)
Date: April 17, 2016 02:55PM
Can this product be bought in the USA? Thank You, Chris Tulk Re: Fuji Resin and Toray Resin
Posted by:
Eric MONTACLAIR
(---.fbx.proxad.net)
Date: April 18, 2016 12:58AM
Eliseu I notice on your videos you're using a small blue brush I never seen before.
Seems to be smaller than the classic throw away brushes. Can you give me lenght and width and maybe were I can find some to try. Thanks. ________________________________________ @+ Eric [www.emfishing.fr] Re: Fuji Resin and Toray Resin
Posted by:
Eliseu Cherene
(---.petrobras.com.br)
Date: April 18, 2016 11:10PM
Chris Tulk Wrote:
------------------------------------------------------- > Can this product be bought in the USA? This resin bought in Japan. If you want I can give a little for testing. Re: Fuji Resin and Toray Resin
Posted by:
Eliseu Cherene
(---.petrobras.com.br)
Date: April 18, 2016 11:12PM
XXX Edited 1 time(s). Last edit at 04/18/2016 11:13PM by Eliseu Cherene. Re: Fuji Resin and Toray Resin
Posted by:
Eliseu Cherene
(---.petrobras.com.br)
Date: April 18, 2016 11:12PM
Eric MONTACLAIR Wrote:
------------------------------------------------------- > Eliseu I notice on your videos you're using a > small blue brush I never seen before. > Seems to be smaller than the classic throw away > brushes. > Can you give me lenght and width and maybe were I > can find some to try. > Thanks. This brush am I doing with nylon 0.14mm Fishing [www.youtube.com] Re: Fuji Resin and Toray Resin
Posted by:
Eric MONTACLAIR
(---.fbx.proxad.net)
Date: April 19, 2016 01:05AM Re: Fuji Resin and Toray Resin
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: April 19, 2016 10:51AM
I would like to know more about Fuji rod finish. Can you post a photo of the package or container? Re: Fuji Resin and Toray Resin
Posted by:
Eliseu Cherene
(---.petrobras.com.br)
Date: April 19, 2016 11:16PM
Jim Ising Wrote:
------------------------------------------------------- > I would like to know more about Fuji rod finish. > Can you post a photo of the package or container? [scontent-gru2-1.xx.fbcdn.net] Sorry, only registered users may post in this forum.
|