SPONSORS
2024 ICRBE EXPO |
Penn 12/0
Posted by:
martin ferral
(---.fuse.net)
Date: April 14, 2016 10:57AM
What size aftco butt would fit a penn 12/0? Re: Penn 12/0
Posted by:
Tom Kirkman
(Moderator)
Date: April 14, 2016 11:02AM
Probably any of them as the reel foot would be a standard size. You'd probably want to size the butt so that its ferrule mates closely to the rod butt diameter.
................ Re: Penn 12/0
Posted by:
martin ferral
(---.fuse.net)
Date: April 14, 2016 11:23AM
I tried an aftco with a size 3 seat and it was too small. I don't have a 4 or 5 to try out. Hoping one of you would know. Re: Penn 12/0
Posted by:
Tom Kirkman
(Moderator)
Date: April 14, 2016 11:52AM
If you'll measure the width and length of the foot somebody here that has a few of those butts can better inform you.
.............. Re: Penn 12/0
Posted by:
martin ferral
(---.mycingular.net)
Date: April 14, 2016 12:07PM
Ok will do. Thanks Tom Sorry, only registered users may post in this forum.
|