SPONSORS
2024 ICRBE EXPO |
Source for Alvey Open Runner - USA
Posted by:
Brittan Battles
(---.eohio.net)
Date: March 27, 2016 08:38PM
Does anyone know or recommend a source for an Alvey Open runner in the USA? I would like to get my hands on one but its hard to justify international shipping for a little $3 component. Any ideas? Re: Source for Alvey Open Runner - USA
Posted by:
Chuck McIntyre
(---.hsd1.co.comcast.net)
Date: March 27, 2016 10:39PM
Lamiglas used to make a series of rods for using Alvey reels. You might try contacting them to see if they have any in a dark corner somewhere. That was quite a few years ago however.
Other than that,try creating your own or bite the bullet and get one from them. While the part may be inexpensive to purchase, it might be worth it to bite the bullet and pay it to keep using the reel. Contact Alvey and ask them to mail it in an envelope as opposed to a little box? Re: Source for Alvey Open Runner - USA
Posted by:
Paul O'Connor
(---.lnse4.cha.bigpond.net.au)
Date: March 28, 2016 05:09AM
The team at Alvey were fantastic to deal with. I was chasing some handles for their vintage timber reels and the service from them wa A1. Re: Source for Alvey Open Runner - USA
Posted by:
Brittan Battles
(---.eohio.net)
Date: March 28, 2016 11:51AM
Thanks for the replies! Re: Source for Alvey Open Runner - USA
Posted by:
Chris Garrity
(---.phlapa.fios.verizon.net)
Date: March 28, 2016 02:20PM
Send me your address, Brittan-- I got a few extras, and I'd be happy to send you one. You can also get them from Gene Brandner, who's the US Distributor of Alvey reels. Sorry, only registered users may post in this forum.
|