SPONSORS
2024 ICRBE EXPO |
Spiral Wrap
Posted by:
Robert Tanner
(---.res.bhn.net)
Date: February 05, 2016 10:49AM
What is a Vibronics spiral wrap? Re: Spiral Wrap
Posted by:
Capt. Michael Harmon
(107.77.70.---)
Date: February 05, 2016 11:51AM
Contact Steve Gardner of Vibronics Custom Rods. MH Re: Spiral Wrap
Posted by:
Mihalyfalvi Gabriel
(89.137.115.---)
Date: February 05, 2016 05:08PM
If I remember correctly its a very slow spiral technique. Edited 1 time(s). Last edit at 02/06/2016 06:39AM by Mihalyfalvi Gabriel. Re: Spiral Wrap
Posted by:
Tom Kirkman
(Moderator)
Date: February 05, 2016 05:20PM
There was an article on Steve's Vibronics rods in the Volume 10 #4 issue of RodMaker. It had to do with a host of things Steve does to his rods, not simply a guide system. In fact I'm not sure there is any special guide system involved, although I know that where applicable Steve uses micro guides on his casting rods. If he's using a certain type spiral system I'm sure he'll weigh in here.
................ Re: Spiral Wrap
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: February 05, 2016 05:26PM
Simple
Put the guides on as a spinning rod Glue the top on Bring the first three up Run line Static test And let the line tell you where the guides should be Keep the line at the bottom of the guides on the three Under pressure Test cast If needed put a bumper on where the line touches the blank Then you can call it anything you want No offense Steve LOL Bill - willierods.com Edited 1 time(s). Last edit at 02/05/2016 05:28PM by bill boettcher. Re: Spiral Wrap
Posted by:
Steve Gardner
(---.nc.res.rr.com)
Date: February 05, 2016 10:02PM
Robert;
Have switched to a new computer and an having trouble getting me email set up. give me a few days then send an email and I will send you copy of how to lay it out. Re: Spiral Wrap
Posted by:
Robert Tanner
(---.res.bhn.net)
Date: February 06, 2016 10:15AM
Thank you Steve see you at the show........... Sorry, only registered users may post in this forum.
|