SPONSORS
2024 ICRBE EXPO |
PEARLabel Software Tip for Saving Tape on PC
Posted by:
Larry Tobin
(---.hsd1.fl.comcast.net)
Date: January 24, 2016 10:31PM
After you create you label in MaxiLabel 5.0, look on the left side look for "Margins". Default is 0.12. Change it to 0.04 by:
You should save about 1/8" on each label. 1. Make sure you select the label (Green Dots around the job) 2. Make sure your job is flush to the red dots on the left side 3. Under Margins, change the settings to: 0.04 4. It's ready to print. At this point, you will save about 1/8" on each label. Call if you have any questions. Also, Free Clear Re-Usable with any request, will be included on any order. Larry Tobin LRT Group, Inc. www.lrtgroup.com larry@lrtgroup.com 954-257-6224 Sorry, only registered users may post in this forum.
|