SPONSORS
2024 ICRBE EXPO |
Re: Guide prep and gaps with Madeira thread
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: January 13, 2016 08:33PM
For whatever it is worth
I place my guides on When in place ready to wrap I start at the tip Make the first wrap as Short as possible - then take a Compass with tow pointers on it Adjustable so it stays where it is - measure the guide wrap enlarge each wrap from the first - as the blank gets thicker if the wraps are the same size they will look short - on down the blank they should get longer Bill - willierods.com Re: Guide prep and gaps with Madeira thread
Posted by:
Steve Cox
(---.client.mchsi.com)
Date: January 17, 2016 01:40PM
Excellent guide prepping technique is a Golden corner stone of good rod building! Learn it. Sorry, only registered users may post in this forum.
|