SPONSORS
2024 ICRBE EXPO |
wire bender
Posted by:
curtis drumm
(---.hsd1.md.comcast.net)
Date: December 23, 2015 05:18PM
Merry Christmas
I am looking for a wire bender that will bend a 360 in the wire, say up to 14 gage. Thank you all. Curt Re: wire bender
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: December 23, 2015 06:35PM
Here are a variety of wire benders.
[www.amazon.com] For a lot of light duty wire bending, the inexpensive jig and pin works pretty well. If you are going to be doing a lot of wire bending, then the use of the heavier duty bender with the long bending arm works very well. Be safe Re: wire bender
Posted by:
Mel Shimizu
(---.lsanca.fios.verizon.net)
Date: December 23, 2015 07:25PM
I do this all the time for making rings for ringing hooks. I use drill mandrels and a drill press for turning multiple rings at a time. It comes out looking like a coil spring. The ID of the rings are determined by the diameter of the drill mandrel. What are you making? Re: wire bender
Posted by:
Spencer Phipps
(172.58.41.---)
Date: December 23, 2015 07:53PM
If you do your search using the word "wire former" you'll have a large variety of options. Re: wire bender
Posted by:
curtis drumm
(---.hsd1.md.comcast.net)
Date: December 24, 2015 03:07PM
I would like to build my own umbrella rigs.
Thanks Curt Re: wire bender
Posted by:
glenn riches
(---.lightspeed.nworla.sbcglobal.net)
Date: December 24, 2015 05:13PM
wire looping pliers Re: wire bender
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: December 24, 2015 06:23PM
Round-nose pliers will work well for this. I use them to make Alabama rigs & spinners and for a variety of other things that require bending and forming wire. You can buy them online or at any good hobby store. Re: wire bender
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: December 25, 2015 04:19AM
Some videos on using various tools for making rigs:
[www.youtube.com] [www.youtube.com] [www.youtube.com] [www.youtube.com] Sorry, only registered users may post in this forum.
|