SPONSORS
2024 ICRBE EXPO |
Permagloss on an Ice Rod?
Posted by:
Nate Nelson
(---.hsd1.mn.comcast.net)
Date: November 09, 2015 10:15PM
Would this work? I just ordered some and am looking for an excuse to use it. Would it be a good replacement for my standard 2 thin coats of FlexCoat? Re: Permagloss on an Ice Rod?
Posted by:
Buzz Butters
(---.dhcp.fdul.wi.charter.com)
Date: November 09, 2015 11:28PM
Nate are you talking putting it on the blank or just the guide wraps?
Buzz Re: Permagloss on an Ice Rod?
Posted by:
Nate Nelson
(---.hsd1.mn.comcast.net)
Date: November 09, 2015 11:34PM
Guide wraps Re: Permagloss on an Ice Rod?
Posted by:
Tom Kirkman
(Moderator)
Date: November 10, 2015 07:52AM
Yes, it'll be fine.
................... Re: Permagloss on an Ice Rod?
Posted by:
Nate Nelson
(---.hsd1.mn.comcast.net)
Date: November 10, 2015 11:39PM
Thanks guys. Does Permagloss darken non threads like a standard finish coat? Re: Permagloss on an Ice Rod?
Posted by:
Tom Kirkman
(Moderator)
Date: November 11, 2015 07:47AM
Yes, somewhat, but perhaps not completely translucent.
................ Re: Permagloss on an Ice Rod?
Posted by:
Randy Kruger
(---.google.com)
Date: November 11, 2015 04:18PM
On ice rods it will work fine. I have even used it to fix splits in old solid glass ice rods as a temporary fix . I perfer lumaseal over perma gloss because it is not as hot. Sorry, only registered users may post in this forum.
|