SPONSORS
2024 ICRBE EXPO |
SIC Concept Tip- Top HELP!!!
Posted by:
Kenneth Probst
(---.dr02.kgmn.az.frontiernet.net)
Date: October 30, 2015 10:39PM
For a halibut rod I order fuji HBSG Sic Guides (black) what would be a good match for a tip-top? Re: SIC Concept Tip- Top HELP!!!
Posted by:
Kenneth Probst
(---.dr02.kgmn.az.frontiernet.net)
Date: October 30, 2015 10:43PM
I found these its for a Phenix Megalodon Mpx - 569 - c - b according to Phenix the top size is a 10 the highest these go is a 9 any suggestions [www.mudhole.com] Re: SIC Concept Tip- Top HELP!!!
Posted by:
Kenneth Probst
(---.dr02.kgmn.az.frontiernet.net)
Date: October 30, 2015 10:46PM Re: SIC Concept Tip- Top HELP!!!
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: October 31, 2015 01:53PM
Looks like you want a heavy duty SIC tiptop with a size 8 ring and a size 10 tube. These are almost impossible to find, did the search at mudhole and found nothing different than what you found. The BPST looks a little frail for what you want to do but it is the only guide I could find, but may work fine. Also went to the new angler resources product catalog and faired no better. There are more options in a size 10 ring, so you may be forced to used one of these. Depending on the actual tip size of the blank you may be able to remove the finish from the tip and have a size 9 tube fit. Hope this helps.
Norm Re: SIC Concept Tip- Top HELP!!!
Posted by:
Kenneth Probst
(---.bhcycmtk01.res.dyn.suddenlink.net)
Date: October 31, 2015 09:55PM
what tip top would you recommend norman i am open to suggestions.
kenne Re: SIC Concept Tip- Top HELP!!!
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: October 31, 2015 10:36PM
Three that look good are your first choice the BBST (10/10 black), the HGST (10/10) and the MNST (10/10) but ithe latter two are gunsmoke color. Any one of these would work just fine. The HGST appears to be a closer match to your guides.
Norm Re: SIC Concept Tip- Top HELP!!!
Posted by:
Kenneth Probst
(---.bhcycmtk01.res.dyn.suddenlink.net)
Date: October 31, 2015 11:09PM
With the bbst the ring size being a 10 and the running guides being an 8 won't that look goofy? And what if any functionality will be loss?
Kenne Re: SIC Concept Tip- Top HELP!!!
Posted by:
Kenneth Probst
(---.bhcycmtk01.res.dyn.suddenlink.net)
Date: October 31, 2015 11:14PM
Perhaps instead of starting with a 12 I could start with a 16 and have 10's as runners I would prefer not to that's why I was in the hopes of gettin away with my choice in the 2nd link I posted. Re: SIC Concept Tip- Top HELP!!!
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: October 31, 2015 11:40PM
Well in that case try the BPST (8/10) you have nothing to lose, and it may work perfectly well. That is basically the only choice you have for a size 8 ring. The BPST is a general purpose spin/cast tiptop. Re: SIC Concept Tip- Top HELP!!!
Posted by:
Capt. Michael Harmon
(107.77.70.---)
Date: November 05, 2015 08:32AM
The larger tip ring won't look goofy. If you reel the swivel or a knot through the tip top it won't lock up and damage it. I use a 10 or larger on bottom rods and surf rods and it doesn't look bad. Good luck, MH Re: SIC Concept Tip- Top HELP!!!
Posted by:
Kenneth Probst
(---.goldenvalleycable.com)
Date: November 05, 2015 03:20PM
I ended up just starting with a 16 and eventually working down to a 10 for runners and tip top! My anal-ness got the best of me I just couldnt wrap my mind around having a different size tip top then runner! I know it probably wouldnt have looked that bad or even really been noticeable but for my peace of mind having ten's as runners seemed to be the best solution.
Kenne ps. Thanks guys for answering my question this board is honestly more useful and helpful then any book or video I have ever read or seen. Sorry, only registered users may post in this forum.
|