SPONSORS
2024 ICRBE EXPO |
visual wrap software
Posted by:
Joseph Renfroe
(---.hsd1.pa.comcast.net)
Date: October 09, 2015 04:58PM
Good evening, I just purchased the Visual wrap software and Billy Vivona book from Mudhole has anyone used this? I have windows 7 on my computer and I have heard I may have problem opening it up or using. Has anyone had any problems and is it easy to use? thanks again for your input have a good weekend Re: visual wrap software
Posted by:
Tony Politi
(---.dyn.optonline.net)
Date: October 09, 2015 09:15PM
Go to the VW website, there is a tutorial on installing it on Windows 7. It worked for me. Re: visual wrap software
Posted by:
Joseph Renfroe
(---.hsd1.pa.comcast.net)
Date: October 09, 2015 09:30PM
Thank you do you like the system? the patterns looked real nice guess time will tell Re: visual wrap software
Posted by:
Joseph Renfroe
(---.hsd1.pa.comcast.net)
Date: October 09, 2015 09:36PM
Thank you do you like the system? the patterns looked real nice guess time will tell Re: visual wrap software
Posted by:
David Boyle
(---.lnse3.cha.bigpond.net.au)
Date: October 09, 2015 10:44PM
Hi Joseph,
As Tony said, visit the forum on the threadcentral website and look at the Using VisualWRAP message board for details on what tweaks are required to run it on Win7. If you have any issues feel free to email me directly. I hope you enjoy using the software. Regards Dave Boyle www.threadcentral.net Re: visual wrap software
Posted by:
Scott Strength
(---.genesco.com)
Date: October 13, 2015 01:51PM
Just a side note from my experience. I have a new laptop with a 4k screen running windows 10. When I tried to install VW per the instructions for windows 7 and 8 I kept getting a Runtime 6 error Overflow. I tried it over and over but with the same results. My thinking was it just wouldn't work with windows 10 so I installed a xp virtual machine. Installed the software and still got the same error in the xp virtual machine. My fix for it came by accident, because I'm not that smart. The default resolution on my new computer is 3200x1800. While I was working in XP VM everything looked too small for me to work with so I bumped the resolution down to 1900x1080. Tried to boot up VW again and Voila!!! It worked. To test it I closed everything and bumped the resolution back up to 3200x1800 and got the runtime 6 error again. Took it back down and it worked. I've not tried installing it on windows 10 using the 7 and 8 methods and bumping down the resolution yet. I'll try it and let everyone know the results. Just thought I would post this so that it might help someone else in the future. Sorry, only registered users may post in this forum.
|