SPONSORS
2024 ICRBE EXPO |
G-Looms
Posted by:
Lee Bossley
(---.nstci.net)
Date: September 11, 2015 06:34AM
Are there still any rod blanks around for purchase?
Thanks, Lee Re: G-Looms
Posted by:
Tom Kirkman
(Moderator)
Date: September 11, 2015 08:02AM
Mud Hole had a fairly large stock at one time. You might inquire with them.
.................. Re: G-Looms
Posted by:
Norman Miller
(---.gtcom.net)
Date: September 11, 2015 10:23AM
The G-Loomis Co. (now owned by Shimano) does not sell blanks to custom rod builders any more. However Gary Loomis does have a relatively new company called North Fork Composites that sells blanks to rod builders. These blanks are distributed thru Batson. They are outstanding blanks, and in my opinion are much better than the old G-Loomis blanks. They are expensive but are worth the money. Re: G-Looms
Posted by:
Lee Bossley
(---.nstci.net)
Date: September 11, 2015 12:00PM
Ok thanks for the info. Re: G-Looms
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: September 11, 2015 01:24PM
Lee,
Another good line of rods to check is the new upper end Batson blank that have come on the market this last year. Very very good quality blanks with great actions for reasonable prices. In particular, check out the three top lines of blanks. There will be one blank in that group that will surely take care of your needs. [www.rainshadowrodblanks.com] Re: G-Looms
Posted by:
Ryan McBride
(---.wavecable.com)
Date: September 18, 2015 11:17AM
If you need any help with RainShadow or NFC blanks, please do not hesitate to ask or call us! R. McBride Batson Enterprises BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com Sorry, only registered users may post in this forum.
|