I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Apologies
Posted by: James(Doc) Labanowski (---.socal.res.rr.com)
Date: August 15, 2015 06:26PM

I havent posted anything in the photo section for a very long time because I lost my log in information for that section. I did some today and noticed a message section. I am so sorry if I havent answered your messages there. I try to answer every message but do most of it thru emails and have recently discovered almost every site has special message area like the one in the photo section. Anyway I am not shinning anyone on, just not well versed in all the techy stuff. I have an open email addy and if you have questions that is probably the surest way to thump me on the head and get my attention. Again Sorry.

Options: ReplyQuote
Re: Apologies
Posted by: Lynn Behler (---.102.204.190.res-cmts.t132.ptd.net)
Date: August 15, 2015 09:09PM

You're the man Doc. Lynn

Options: ReplyQuote
Re: Apologies
Posted by: Barry Thomas Sr (---.hsd1.nj.comcast.net)
Date: August 16, 2015 01:45PM

Deification Occurs !

Options: ReplyQuote
Re: Apologies
Posted by: Lynn Behler (---.102.204.190.res-cmts.t132.ptd.net)
Date: August 16, 2015 03:41PM

Not quite, but the man provides some very helpful info for us mere mortals.

Options: ReplyQuote
Re: Apologies
Posted by: James(Doc) Labanowski (---.socal.res.rr.com)
Date: August 16, 2015 04:11PM

If a problem exists I am sure open to discussing it but better privately than on an open forum



Edited 1 time(s). Last edit at 08/16/2015 04:15PM by James(Doc) Labanowski.

Options: ReplyQuote
Re: Apologies
Posted by: Lynn Behler (---.102.204.190.res-cmts.t132.ptd.net)
Date: August 16, 2015 08:11PM

No problem, I respect you, someone takes offense. Case closed. Lynn

Options: ReplyQuote
Re: Apologies
Posted by: Ed Sabatini (---.static.hvvc.us)
Date: August 16, 2015 09:25PM

One things for sure- this would be the one and only forum where you can discuss things out in the open and not be attacked or flamed. Not perfect but surely the most civil and engaging rod building there has ever been.

Options: ReplyQuote
Re: Apologies
Posted by: Tom Kirkman (Moderator)
Date: August 17, 2015 11:11AM

Lynn,

Barry did not mean any offense, if that's what you were referring to. I suspect he paid Doc a compliment and it was taken the wrong way.

................

Options: ReplyQuote
Re: Apologies
Posted by: Lynn Behler (---.102.204.190.res-cmts.t132.ptd.net)
Date: August 17, 2015 01:03PM

Sorry Barry, the heat got to me! Lynn

Options: ReplyQuote
Re: Apologies
Posted by: James(Doc) Labanowski (---.socal.res.rr.com)
Date: August 19, 2015 03:30PM

I got an email from Barry and everything is all cool. The Misspelling of the word kinda lead to confusion. Sorry to cause any type of unrest. Lots of great information on this forum

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster