SPONSORS
2024 ICRBE EXPO |
photographing rods
Posted by:
marty mulcairn
(---.bb.sky.com)
Date: July 28, 2015 09:53AM
I always struggle to take decent pics of my rod builds - closeups are fine but i just cant get a decent pic of the whole rod.
Do i need a wide angle lens or is there a trick or two to decent pics? Any tips gladly received! cheers marty Re: photographing rods
Posted by:
Tom Kirkman
(Moderator)
Date: July 28, 2015 11:56AM
A wide angle lens will let you get the whole rod without having to pull away so much, but in the end the result is about the same. The fact is, trying to photograph the rod, end to end, results in a photograph that isn't going to show much detail in any particular portion of the rod. If you'll notice in the RodMaker Photo Gallery, I generally put in the builder's full rod photo, then bracket it with close-ups of the handle, decorative wrap and butt guide areas. It's the only way to really good get views of those smaller areas.
.............. Re: photographing rods
Posted by:
Mud Hole Custom Tackle
(---.res.bhn.net)
Date: July 28, 2015 12:37PM
Marty,
When you figure out what works best for you to take photos of your custom rods, we suggest submitting your photos to Mud Hole for our annual 2016 Calendar Contest and you might win some $$$ for your efforts. Read all about the Calendar Contest on the link below: [blog.mudhole.com] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: photographing rods
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: July 29, 2015 03:39PM
the best thing to do, is to take one long shot overall picture of the rod, and then take about 4 or 5 close up pictures of the grip, reel seat, various guides and the tip.
When you want great detail on something that is only a couple of inches long and you have a rod that is 9 feet long, you can not do justice to either. Be safe Re: photographing rods
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: July 29, 2015 05:24PM
I think that any rod or pictures look better with - Out side light _ Don't think anyone has made a blab better the natural light Bill - willierods.com Re: photographing rods
Posted by:
eric zamora
(---.lightspeed.frsnca.sbcglobal.net)
Date: July 30, 2015 12:41AM
what exactly makes a "decent" photo of the entire rod by your definition and how do yours fall short? using a wide angle lens helps, but if you're not careful, it may have some distortion. people will ask, hey, how come it's bent at the end(s)?!
a photo showing the entire rod is useful, but it's limited too. detail shots really show off the rod. in my mind, an overall shot of the rod is secondary. outside light has its own drawbacks, it's not the perfect answer. you can photograph a rod with flash in a manner which doesn't look like it was shot with flash. this is my preferred method. but it takes tricks. what the heck is a "blab"? eric fresno, ca. Re: photographing rods
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: July 30, 2015 07:01AM
SORRY - BULB lol
the glass housing, in which a partial vacuum has been established, that contains the filament of an incandescent electric lamp. Bill - willierods.com Sorry, only registered users may post in this forum.
|