SPONSORS
2024 ICRBE EXPO |
Second coat of epoxy
Posted by:
phil ayers
(50.58.79.---)
Date: July 09, 2015 12:30PM
I poster earlier about the finish being soft, It has been 1 week and has not hardened up completely. It is soft not sticky and does not leave a finger print. Jay advised to add a second coat and make sure of my mixture. Is there anything I should do before adding a second coat? Re: Second coat of epoxy
Posted by:
Tom Kirkman
(Moderator)
Date: July 09, 2015 12:34PM
When you say soft, how soft are we talking? Soft enough to put a hard pressed thumbnail in? Or much softer than that?
........... Re: Second coat of epoxy
Posted by:
phil ayers
(50.58.79.---)
Date: July 09, 2015 12:38PM
Possibly, I haven't tried that. Re: Second coat of epoxy
Posted by:
phil ayers
(50.58.79.---)
Date: July 09, 2015 12:43PM
It is not much softer, I don't think you could see a finger nail mark. When you press it does feel like it moves, it's just soft. Soft is hard to describe. Re: Second coat of epoxy
Posted by:
phil ayers
(50.58.79.---)
Date: July 09, 2015 12:44PM
I am sorry it does not feel like it moves, its just not hard. Phil Re: Second coat of epoxy
Posted by:
Tom Kirkman
(Moderator)
Date: July 09, 2015 12:58PM
I don't think I'd add another coat of finish. What you have is likely just fine as is. If it won't take a fingernail edge impression, it's more than hard enough to hold up and do what it needs to do.
................. Sorry, only registered users may post in this forum.
|