SPONSORS
2024 ICRBE EXPO |
Dick Kantner
Posted by:
Tom Kirkman
(Moderator)
Date: July 03, 2015 10:41PM
Dick Kantner, an industry icon in the use of carbon fiber in fishing rod construction, passed away on June 26th. Many of you may remember Dick as the founder of Graphite USA back in the 1980's. He was an extremely knowledgeable member of the rod building/blank manufacturing industry and also one of it's earliest pioneers. He will be missed.
...................... Re: Dick Kantner
Posted by:
Tom McNamara
(---.res.bhn.net)
Date: July 06, 2015 10:27PM
Very sorry to hear this. I’ve worked with Dick at Graphite USA developing some blanks in the 1990’s. In looking for his obituary online, I came across a YouTube video of him telling about his work for the CIA in the 1960’s. I did not realize how far back his graphite engineering went. Dick played a major role in early “stealth technology” in the 1960’s by developing radar absorbing leading edge of the wings and turbine spike for the A-12 and SR-71 as well as stealth paint [www.youtube.com]
Years later he applied his knowledge to the sporting goods industry with his company Composite Development Corporation which lead to rod blanks and Graphite USA company with their duel helical designs. Those original GUSA blanks made by Dick and his sons’ were very powerful and he built nice fly rods for Powell, however I would say his business acronym was not as good as his engineering knowledge. So he sold GUSA to Roy Hasting, Roy moved it to AZ and renamed it to United Composite’s to avoid paying Dick royalties on the GUSA name. Roy got into legal trouble and the business was mothballed then sold out of receivership to Gary in Australia who moved in back to CA – but the equipment was very neglected and all the moving took its toll. Gary ran it for a while, then sold it to Randy Penny (formally with Seeker) who is running it today as United Composites. Such is the life of a blank company! Dick’s knowledge of graphite and specially of duel helix rod blank construction has been lost to time I’m afraid – I’m sure his original designs were passed along with the equipment, but the deep understanding was not. RIP old friend. Sorry, only registered users may post in this forum.
|