SPONSORS
2024 ICRBE EXPO |
Lazer engraver
Posted by:
Frank McKinney
(---.sub-70-196-11.myvzw.com)
Date: June 07, 2015 08:05PM
Does anyone have a recommendation for a decent laser engraver to engrave logo's and names on a reel seats and handles. Re: Lazer engraver
Posted by:
Fred Cory
(---.cisco.com)
Date: June 08, 2015 03:37PM
The inexpensive Laser engravers I have seen are pretty small with hard side walls - not sure you could get a rod butt into them.
They get expensive very quickly... Re: Lazer engraver
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: June 08, 2015 06:01PM
After looking into the costs and limitations, I have opted for using a local trophy shop. Professional equipment and assistance. Sorry, only registered users may post in this forum.
|