SPONSORS
2024 ICRBE EXPO |
who are OEM's using for thread
Posted by:
Thomas Kaufmann
(---.direcpc.com)
Date: May 20, 2015 04:28PM
With the many discussions regarding thread lately, I have begun to wonder who the OEM's are using now that Gudebrod is no longer around. I recall specifically that St. Croix used them and if I recall so did Lamiglass but I may be off on them.
Just curios on a rainy lazy day. Tom Re: who are OEM's using for thread
Posted by:
Mud Hole Custom Tackle
(---.res.bhn.net)
Date: May 20, 2015 05:11PM
Prowrap Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: who are OEM's using for thread
Posted by:
Geoff Staples
(---.olypen.com)
Date: May 20, 2015 06:32PM
I'd be surprised if there was any major thread vendor that wasn't providing some thread to OEM's. We sell plenty of OEM's thread in the U.S. and overseas. -The Batson TEAM BatsonEnterprises.com Re: who are OEM's using for thread
Posted by:
Thomas Kaufmann
(---.direcpc.com)
Date: May 20, 2015 10:22PM
I am going to ask a question that I am sure I already know the answer to, but is there a way to find out who is using what so that you can match when it comes time for repair? I know that is a shot in the dark question but it never hurts to ask.
thanks, Tom Re: who are OEM's using for thread
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 21, 2015 09:51AM
I suggest that the best way to know who an OEM uses for a thread supplier is to call the manufacturer in question and simply ask them.
Most of them will readily supply the name and even thread color for a particular rod. But, remember, there are thousands of manufacturers around the world who make thread. It would not surprise me at all to learn that a manufacturer uses a thread maker that may not be at all familiar to anyone here on the forum. Good luck Re: who are OEM's using for thread
Posted by:
James Newsome
(---.244.204.207.client.dyn.strong-sf33.as22781.net)
Date: May 21, 2015 10:04AM
Also remember that most of the thread "companies" that offer thread to the custom rod building market don't actually make thread. They buy it from the manufacturer and relable it for resale. So the bigger rod companies most probably just buy it direct from the same people that these thread "companies" do. Re: who are OEM's using for thread
Posted by:
Thomas F. Thornhill
(---.ptld.qwest.net)
Date: May 21, 2015 11:24AM
I've been outwrapping for over twenty years and I have wrapped rods for Loomis , Lamiglas, Sage, Burkheimer and many other companies when I wrapped for Ordella and D&E Rods. All of the companies I wrapped for used Gudebrod, it was the standard of the industry. Re: who are OEM's using for thread
Posted by:
Thomas F. Thornhill
(---.ptld.qwest.net)
Date: May 21, 2015 11:24AM
Now i see how people get double posts. Edited 1 time(s). Last edit at 05/21/2015 11:34AM by Thomas F. Thornhill. Re: who are OEM's using for thread
Posted by:
Don @ American Tackle
(---.se.biz.rr.com)
Date: May 21, 2015 01:12PM
As Tom said..... GB was the standard.....As Mudhole said..... ProWrap is now the standard. _______________________________ God Bless, Don Morse 800-516-1750 ext. 1207 / don@americantackle.us Rod Building..... It's What We Do. Re: who are OEM's using for thread
Posted by:
Thomas Kaufmann
(---.direcpc.com)
Date: May 21, 2015 03:02PM
thanks all for the replies!! I guess, I will simply ask the manufacturer when the time comes.
Thanks again, Tom Re: who are OEM's using for thread
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: May 21, 2015 03:59PM
Or
Take a large section of the old thread off and outside ( very good light ) look at it underneath and match it to a spool of thread Bill - willierods.com Re: who are OEM's using for thread
Posted by:
eric zamora
(---.lightspeed.frsnca.sbcglobal.net)
Date: May 22, 2015 10:44AM
Tom, I know with Sage fly rods, i simply called them when wrapping an XP for a buddy. they provided the gudebrod color over the phone.
eric fresno, ca. Sorry, only registered users may post in this forum.
|