SPONSORS
2024 ICRBE EXPO |
2nd coat
Posted by:
Bruce Tomaselli
(---.altnpa.east.verizon.net)
Date: May 13, 2015 07:30PM
I put the first coat of Flex Coat Lite on at around 5 PM yesterday (Tuesday). I can't put the second coat on until 10 AM tomorrow (Thursday). Is that waiting too long? I guess that's about 40 hours.
Thanks, Bruce Re: 2nd coat
Posted by:
Russell Brunt
(---.lightspeed.miamfl.sbcglobal.net)
Date: May 13, 2015 07:41PM
No. In short it is never too long. What does change is if it forms a chemical bond or simply an adhesion bond. 48 hours is a generally excepted limit for chemical bond. What that means for you is.....no prep other than removing dust/dirt (so don't use a solvent!!!!).....and as good a result as if it was all applied at once. Russ in Hollywood, FL. Re: 2nd coat
Posted by:
Tom Kirkman
(Moderator)
Date: May 13, 2015 07:45PM
You'll be fine. No worries.
............... Re: 2nd coat
Posted by:
Bruce Tomaselli
(---.altnpa.east.verizon.net)
Date: May 13, 2015 08:07PM
Thanks, Tom. Sorry, only registered users may post in this forum.
|