I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Fuji VSSM seat with custom EVA grips
Posted by: mick vickers (---.a1a.zs.ncren.net)
Date: May 08, 2015 10:26AM

I am using this seat and making a custom grip. what is the best way to cut the EVA to match the contours of the seat, X-Acto? I have ordered a stock seat to use as a pattern.
Thanks,
Mick

Options: ReplyQuote
Re: Fuji VSSM seat with custom EVA grips
Posted by: Billy Vivona (---.nycmny.fios.verizon.net)
Date: May 08, 2015 11:31PM

THrow the seat away and use a different one

Options: ReplyQuote
Re: Fuji VSSM seat with custom EVA grips
Posted by: Tom Kirkman (Moderator)
Date: May 09, 2015 07:41AM

If you're going to try the Xacto knife route, trace a pattern onto some paper held to the seat. Then transfer that to the grip. Leave some additional length on the grip, in case of a screw-up. That way you can trim back and try again.

...................

Options: ReplyQuote
Re: Fuji VSSM seat with custom EVA grips
Posted by: mick vickers (---.a1a.zs.ncren.net)
Date: May 11, 2015 01:25PM

can't throw it away Billy, it's already in the mail to you!!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster