SPONSORS
2024 ICRBE EXPO |
Aero seat - searching for a gold hood
Posted by:
Mike Canavan
(---.stny.res.rr.com)
Date: May 04, 2015 08:38PM
Looking for a gold hood/nut to fit an Aero 16 seat, anything compatible from another seat or mfg?
Thank you! Re: Aero seat - searching for a gold hood
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 04, 2015 09:07PM
Mike,
Drop me an e-mail. hfllier@comcast.net I have one and will send it to you. Here is a picture of the gold nuts that I have: [www.rodbuilding.org] When I used the nut on a rod, I trimmed it shorter so that when the reel is tight, the nut comes just to the end of the threads. Then, I buffed the nut to remove the ridges that are standard for this nut. This nut came from a batch of closed out pieces that I picked up many years ago. Edited 1 time(s). Last edit at 05/04/2015 09:11PM by roger wilson. Re: Aero seat - searching for a gold hood
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: May 04, 2015 09:12PM
If he picks up another seat - spinning - casting That has a gold hood he will just take one off and replace it with the other Butt he will have still a complete seat he can use in stead of a hood he has to figure out where to use it Bill - willierods.com Re: Aero seat - searching for a gold hood
Posted by:
Mike Canavan
(---.stny.res.rr.com)
Date: May 05, 2015 06:07AM
Hi Roger, thank you so much for your offer! I am having trouble sending you an email, not sure why, will try again... Re: Aero seat - searching for a gold hood
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 05, 2015 11:11AM
Mike,
If you unhide your e-mail I will send you a mail if you are having issues. But, again, my e-mail is: hflier@comcast.net Take care Roger Re: Aero seat - searching for a gold hood
Posted by:
Mike Canavan
(---.stny.res.rr.com)
Date: May 05, 2015 04:12PM
Hi Roger - email successfully sent (I hope!)
Many thanks! Mike Re: Aero seat - searching for a gold hood
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 05, 2015 04:25PM
Mike,
I have it and hood sent. Re: Aero seat - searching for a gold hood
Posted by:
carol staiculescu
(---.opera-mini.net)
Date: May 10, 2015 12:49PM
Any other 16 thread nut will fit an Aero reel seat ( from Fuji , Pacific Bay or any other producer). kingofbeasts custom rods Re: Aero seat - searching for a gold hood
Posted by:
carol staiculescu
(---.opera-mini.net)
Date: May 10, 2015 12:53PM
You might like the Alps LN 16 nut ;) kingofbeasts custom rods Edited 1 time(s). Last edit at 05/10/2015 12:54PM by carol staiculescu. Sorry, only registered users may post in this forum.
|