SPONSORS
2024 ICRBE EXPO |
Rod maker mag - info question
Posted by:
John Tallyn
(---.hsd1.or.comcast.net)
Date: April 22, 2015 12:42PM
I've just subscribed to rodmaker mag, and also want to order some back issues with specific info. I'm looking for articles on using U40 dura gloss ls, and articles dealing with thinning and using other epoxies. Any help as far as what issues might have these would be appreciated.
Thanks John Re: Rod maker mag - info question
Posted by:
Lynn Leary
(---.hsd1.ca.comcast.net)
Date: April 22, 2015 01:32PM
Go here: [www.rodmakermagazine.com]
click "more info" for a brief summary of what is in each issue. Hope this helps Re: Rod maker mag - info question
Posted by:
Tom Kirkman
(Moderator)
Date: April 22, 2015 03:35PM
The only articles in the magazine on thinning epoxies will be one telling you not to do it.
............. Re: Rod maker mag - info question
Posted by:
John Shear
(198.135.125.---)
Date: April 22, 2015 03:54PM
If you want a thinner epoxy, try different brands/formulations to find one with the attributes you're looking for. That's what I did to find which worked best in my cold basement shop. John Shear Chippewa Falls, WI Sorry, only registered users may post in this forum.
|